Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
continued Playing the CD tracks in random order (continued) To cancel Shuffle Play Press PLAY MODE repeatedly until “SHUFFLE” or “PROGRAM” disappears from the display. The tracks continue playing in their original order. To select a desired CD Press DISC 1 – 3. Tips • You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select “SHUFFLE”. • To skip a track, press +. Programming the CD tracks –– Program Play You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. 64 41 3 2 2,8 =+ (Pp 4 2 5 CLEAR CHECK 2,8 1 Place CDs on the disc tray. 2 Press CD (P(or (on the remote) and then p. 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 4 Press one of the DISC 1 – 3 buttons or DISC SKIP repeatedly to select a CD. 5 Press =or +repeatedly until the desired track appears in the display. Disc number Track number PROGRAM DISC VOLUME Total playing time (including selected track) 6 Press ENTER/NEXT. The track is programmed and the program step number appears. The last programmed track PROGRAM DISC STEP VOLUME Program step number 7 To program additional tracks, repeat steps 4 to 6. Skip step 4 to select tracks from the same disc. 8 Press CD (P(or ( on the remote). All the tracks play in the order you selected. To cancel Program Play Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. continued Programming the CD tracks Tips (continued) To Press Check the CHECK on the remote program repeatedly. After the last track, “CHECK END” appears. Clear a track from CLEAR on the remote in the end stop mode. Clear a specific CHECK on the remote track repeatedly until the number of the track to be erased appears, then press CLEAR. Add a track to the program 1 Press one of the DISC 1 – 3 buttons or DISC SKIP to select a CD. 2 Select the track by pressing =or +. 3 Press ENTER/NEXT. Clear the entire ponce in stop mode or program twice while playing. • The program you made remains in the CD player even after it has been played back. Press CD (P to play the same program again. • If the total playing time does not appear while programming, this means: – you have programmed a track number which exceeds 20, or – the total playing time has exceeded 100 minutes. • “FULL” appears when you try to program over 32 tracks. The Tape Deck The Tape Deck Recording CDs by specifying the track order — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. PLAY MODE 4 32 1 Follow steps 1 to 7 in “Programming the CD tracks” (see page 19). 2 Press p6and insert a blank tape into deck A. 3 Press ron deck A. Recording starts. 4 Press CD (P. The tracks play in the order you selected. To stop recording Press p6 on deck A. To cancel Program Edit Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. continued Recording CDs by specifying the track order (continued) Selecting tape length automatically —Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 2 1 DISC SKIP 4,7 3,6 5,8 1 Place a CD on the disc tray. If the disc number you want to record is not displayed, press DISC SKIP repeatedly so that it appears. 2 Press EDIT. The required tape length for the currently selected CD appears, followed by the total playing time for sides A and B respectively. 3 Press p6and insert a blank tape in deck A. 4 Press ron deck A. Recording starts. 5 Press CD (P. The CD player starts playing the tracks to be recorded on side A. When the last track for side A finishes playing, the CD player changes to playing pause automatically. 6 Remove the tape from deck A, and insert it again with the side B facing forward. Then rewind the tape completely. 7 Press ron deck A. Recording starts for side B. 8 Press CD (P. The CD player starts playing the tracks to be recorded on side B. Note You cannot use this function after programming. In order to use this function, you must first erase the program (see “Clear the entire program” in the table on page 20). Sound Adjustment Sound Adjustment Adjusting the sound Selecting the audio emphasis You can reinforce the bass and listen with headphones. The audio emphasis menu lets you select the sound characteristic according to the sound DBFB you are listening to. FILE SELECT PHONES To reinforce bass (DBFB) Press DBFB*. “DBFB ”appears in the display. To cancel DBFB, press DBFB so that “DBFB ” disappears from the display. * DBFB = Dynamic Bass Feedback To listen through the headphones Connect the headphones to PHONES jack. No sound will come from the speakers. /Press FILE SELECT repeatedly until the effect you desire (ROCK, POP or DANCE) appears in the display. To cancel the effect Press FILE SELECT repeatedly until “FLAT” appears in the display. Other Features Other Features...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-GRX2 (372.37 kb)