Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• If the total playing time does not appear while programming, this means: – you have programmed a track number which exceeds 20, or – the total playing time has exceeded 100 minutes. • “FULL” appears when you try to program over 32 tracks. The Tape Deck The Tape Deck Recording CDs by specifying the track order — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. PLAY MODE 4 32 1 Follow steps 1 to 7 in “Programming the CD tracks” (see page 19). 2 Press p6and insert a blank tape into deck A. 3 Press ron deck A. Recording starts. 4 Press CD (P. The tracks play in the order you selected. To stop recording Press p6 on deck A. To cancel Program Edit Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. continued Recording CDs by specifying the track order (continued) Selecting tape length automatically —Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 2 1 DISC SKIP 4,7 3,6 5,8 1 Place a CD on the disc tray. If the disc number you want to record is not displayed, press DISC SKIP repeatedly so that it appears. 2 Press EDIT. The required tape length for the currently selected CD appears, followed by the total playing time for sides A and B respectively. 3 Press p6and insert a blank tape in deck A. 4 Press ron deck A. Recording starts. 5 Press CD (P. The CD player starts playing the tracks to be recorded on side A. When the last track for side A finishes playing, the CD player changes to playing pause automatically. 6 Remove the tape from deck A, and insert it again with the side B facing forward. Then rewind the tape completely. 7 Press ron deck A. Recording starts for side B. 8 Press CD (P. The CD player starts playing the tracks to be recorded on side B. Note You cannot use this function after programming. In order to use this function, you must first erase the program (see “Clear the entire program” in the table on page 20). Sound Adjustment Sound Adjustment Adjusting the sound Selecting the audio emphasis You can reinforce the bass and listen with headphones. The audio emphasis menu lets you select the sound characteristic according to the sound DBFB you are listening to. FILE SELECT PHONES To reinforce bass (DBFB) Press DBFB*. “DBFB ”appears in the display. To cancel DBFB, press DBFB so that “DBFB ” disappears from the display. * DBFB = Dynamic Bass Feedback To listen through the headphones Connect the headphones to PHONES jack. No sound will come from the speakers. /Press FILE SELECT repeatedly until the effect you desire (ROCK, POP or DANCE) appears in the display. To cancel the effect Press FILE SELECT repeatedly until “FLAT” appears in the display. Other Features Other Features Falling asleep to music — Sleep Timer You can let the system turn off at the preset time, so you can sleep to the CD. You can preset the time to be turned off by 10 minutes. =+ (Pp SLEEP /Press SLEEP. Every time you press the button, the minute display (the turn-off time) changes as follows: AUTO n90min n80min n70min n… n10min nOFF nAUTO … When you choose AUTO The power turns off when the current CD finishes playback (for up to 100 minutes). To check the remaining time Press SLEEP once. To change the time to turn off Select the time you want by pressing SLEEP. To cancel the Sleep Timer function Press SLEEP repeatedly until “OFF” appears. Waking up to music — Wake-up Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 2: Setting the time”). The 24-hour system model is used for illustration purpose. 9 2 4,5,6,8 3 TIMER ON/OFF 5,6,7 1 Prepare the music source you want to play. • CD: Place a CD. To start from a specific track, make a program (see “Programming the CD tracks”). • Radio: Tune in the preset station you want (see “Step 3: Presetting radio stations”). 2 Turn VOLUME to adjust the volume. 3 Press CLOCK/TIMER SET. “SET DAILY” appears. 4 Press ENTER/NEXT. “ON” appears and the hour digits flash in the display. ALL DISCS DAILY VOLUME 5 Set the time to start playback. Press =or +repeatedly to set the hour, then press ENTER/NEXT. The minute indication starts flashing. ALL DISCS DAILY VOLUME Press =or +repeatedly to set the minute, then press ENTER/NEXT. “OFF” appears and the hour indication flashes again. 6 Set the time to stop playback following the above procedure. 7 Press =or +repeatedly until the music source you want appears. The indications change as follows: TUNER .CD PLAY 8 Press ENTER/NEXT. The start time, followed by the stop time and the music source, appears, then the original display appears. 9 Turn off the power. To check the setting Press TIMER ON/OFF to turn on the DAILY indication in the display. To change the setting, start over from step 1. To cancel the timer operation Press TIMER ON/OFF to tu...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-RX33 (372.37 kb)