Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To cancel Repeat Play Press REPEAT so that “REPEAT”, “REPEAT 1” or “REPEAT ALL DISC” disappears from the display. LBT-G1. 3-859-546-13. EN Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all CDs in random order. 21 1 Press CD and place a CD on the disc tray. 2 Press SHUFFLE. “SHUFFLE” appears, then all the tracks play in random order. To cancel Shuffle Play Press SHUFFLE so that “SHUFFLE” disappears. Tips • You can start Shuffle Play during normal play by displaying “SHUFFLE”. • To skip a track, press )±. Note You cannot select a CD even if you press DISC SKIP while shuffle play. Programming the CD tracks –– Programme Play You can make a programme of up to 32 tracks from all the CDs in the order you want them to be played. 2,5 3 p 714 (P=+ p CLEAR 1 Press CD and place a CD on the disc tray. 2 Press PROGRAM. “PROGRAM” appears. 3 Press one of the DISC 1 – 3 buttons to select a CD. LBT-G1. 3-859-546-13. EN 4 Press )±or 0 to select a track. Selected track 1 2 3 PROGRAM PRESET EQ FLAT ROCK POPS JAZZ Selected disc 5 Press PROGRAM. The track is programmed. The last programmed track appears. 6 To programme additional tracks, repeat steps 3 to 5. Skip step 3 if you select a track from the same disc. 7 Press aP. All the tracks play in the order you selected. To Press Programme a pause aP Stop play p Cancel programme p play Erase a track CLEAR on the remote in from the end stop mode Erase the entire pfor more than two programme seconds Tips • The programme you made remains after the Programme Play has finished. To play the same programme again, press aP. • “FULL” appears when you have programmed more than 32 track numbers. Playing only the beginning of each track — Music Scan The begining of each track on all the CDs in the CD tray play for 10 seconds. (P=+ p M.SCAN To play only the begining of each track Press M. SCAN on the remote. Track number blinks during the scanning. To cancel music scan Press M. SCAN on the remote again. LBT-G1. 3-859-546-13. EN The Tape Deck The Tape Deck Recording a CD by specifying track order –– Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. 4 Press aP. CD play starts. To stop recording Press p6on deck A and pon the CD player. To cancel Program Edit Press PROGRAM so that “PROGRAM” disappears. p 3 4 2 1 Follow step 1 – 6 in “Programming the CD tracks” (see p.16). 2 Press p6and insert a blank tape into deck A. With the side you want to record on facing forward 3 Press r. Recording starts. LBT-G1. 3-859-546-13. EN Sound Adjustment Sound Adjustment Adjusting the sound You can listen to music with strong bass. DBFB To reinforce the bass sound Press DBFB (Dynamic Bass Feedback). The lamp on the button lights up. Press the button again to cancel DBFB. Selecting the Preset Equalizer menu The Preset Equalizer enables you to select the sound characteristic among four sound effects according to the sound you are listening to. PRESET EQ To select the sound characteristic Press PRESET EQ repeatedly to select your desired sound effect. Selected sound 1 2 3 PRESET EQ DISC FLAT ROCK POPS JAZZ effect To cancel the Preset Equalizer Press PRESET EQ until “FLAT” is selected. Tip The Preset Equalizer effect is not recorded on a tape. LBT-G1. 3-859-546-13. EN Other Features Other Features Falling asleep to music — Sleep Timer You can let the system turn off at a preset time, so you can sleep to the music. You can preset the time to be turned off by 10 minutes. Make sure you have set the clock (see page 5). SLEEP (P=+ p Press SLEEP on the remote. “SLEEP” appears. Each time you press the button, the minute display (the turn-off time) changes as follows: SLEEP 90 n80 n70 n… n10 (Sleep off) N To check the remaining time Press SLEEP once. To change the time to turn off Select the time you want by pressing SLEEP. To cancel the Sleep Timer function Press SLEEP repeatedly until “SLEEP” disappears. LBT-G1. 3-859-546-13. EN Waking up to music — Wake-up Timer You can wake up to music at a preset time. Make sure you have set the clock (see page 5). 7 3,4,5 6 2 4,5 1 Prepare the music source you want to play. • CD: Place a CD. • Radio: Tune in a station (see page 11). 2 Turn VOLUME to adjust the sound volume. 3 Press TIMER SET. 4 Set the time to start play. Press )±or 0to set the hour, then press TIMER SET. The minute indication starts flashing. PRESET EQ FLAT ROCK POPS JAZZ MHz Press )±or 0to set the minute, then press TIMER SET. The hour indication flashes again. 5 Set the time to stop playback. Press )±or 0 to set the hour, then press TIMER SET. The minute indication starts flashing. PRESET EQ FLAT ROCK POPS JAZZ MHz Press )±or 0to set the minute, then press TIMER SET. The start time, followed by the stop time, the music source and volume appear, then the original display appears. 6 Press TIMER MODE. “TIMER” appears. 7 Press POWER to ...