Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.36 mb Dateiname: Unterrichtssprache:

To resume recording, press PAUSE again. 6 To stop recording, press STOP•OPEN. Maintenance Recording from Aux 1 Select AUX source. 2 If necessary, prepare the additional appliance for recording. 3 Press RECORD to star t recording. Cleaning the Cabinet . Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs . When a disc becomes dir ty, clean it with a cleaning cloth. Wipe the disc from the centre out. . Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens . After prolonged use, dir t or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. Cleaning the Heads and the Tape Paths . To ensure good recording and playback quality, clean the heads A, the capstan(s) B, and pressure roller(s) C after ever y 50 hours of tape operation. . Use a cotton swab slightly moistened with cleaning fluid or alcohol. . You can also clean the heads by playing a cleaning tape once. A A B C Demagnetising the heads . Use a demagnetising tape available at your dealer. 18 Clock/Timer 1 2 1 2 3 4 5 BAND RDS CLOCK TIMER ON OFF PREV NEXT STOP iR PLAY•PAUSE SOURCE SELECT SHUFFLESTANDBY-ON PROGRAM REPEAT Setting the clock There are two possible methods for setting the clock: manually or automatically by using RDS. Automatic clock setting (RDS versions only) Tune to a RDS station (see Radio Reception). Press CLOCK for more than 2 seconds. . SEARCH RDS TIME is displayed for a maximum of 90 seconds; the time is then displayed. . NO RDS TIME is displayed if no time signal has been received and you will have to set the clock manually. Manual clock setting In standby, press CLOCK. . The clock digits for the hours flash. Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. Press CLOCK again. . The clock digits for the minutes flash. Turn VOLUME to set the minutes: clockwise for minutes up; anti-clockwise for minutes down. Press CLOCK to confirm the time. Setting the timer . The system can be used as an alarm clock, whereby the CD or TUNER is switched on at a set time.The clock time needs to be set first before the timer can be used. . During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. 1 In any mode, press TIMER ON•OFF for more than 2 seconds. 2 Turn VOLUME clockwise (or press SELECT SOURCE) to select sound source. 3 Press TIMER ON•OFF to confirm your desired mode. . The selected source CD or TUNER is shown. The clock digits for the hours flash. 4 Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. 5 Press TIMER ON•OFF again. . The clock digits for the minutes flash. 6 Turn VOLUME to set the minutes: clockwise for minutes up; anti-clockwise for minutes down. 7 Press TIMER ON•OFF to confirm the time. . The timer is now set and activated. Activating and deactivating TIMER . In standby or during playback, press TIMER ON•OFF once. . Display shows TIMER if activated, and disappears if deactivated. English 19 Clock/Timer English . To deactivate, press SLEEP on the remote Activating and deactivating control once or more until SLEEP OFF is SLEEP shown, or press STANDBY ON on the system The sleep timer enables the system to switch off or remote control. by itself after a set period of time.The clock time . SLEEP OFF scrolls across the display. needs to be set first before the sleep timer can be used. . Press SLEEP on the remote control once or more. . Display shows SLEEP and one of the sleep time options in sequence: 60, 45, 30,15, UFFLE SLEEP SLEEP OFF, 60... if you have selected a time. Once SLEEP is activated, SLEEP ON scrolls across the display at repeated inter vals. Specifications AMPLIFIER Output power .......................................... 2 x 5 W RMS ............................................................. 10 W + 10W MPO Signal-to-noise ratio .......................... . 65 dBA (IEC) Frequency response ......... 40 – 20000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ......................................... 8 . Impedance headphones ................. 32 . – 1000 . CD PLAYER Frequency range .................................. 20 – 20000 Hz Signal-to-noise ratio ............................................ 75 dBA TUNER FM wave range ................................... 87.5 – 108 MHz MW wave range ................................ 531 – 1602 kHz LW wave range ..................................... 153 – 279 kHz Sensitivity at 75 . – mono, 26 dB signal-to-noise ratio ............ 2.8 .V – stereo, 46 dB signal-to-noise ratio ........ 61.4 .V Selectivity ................................................................. . 28 ...

Herunterladen

Geben Sie zwei Ziffern: