Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Kenwood Dateigröße: 2.08 mb Dateiname: Unterrichtssprache:

2 Press the ON/STANDBY button to turn the power on. 3 Press the VIDEO/AUX button. 4 Operate the external unit. 5 To record the sound from the external unit, perform steps 2 -4 of the “Recording from the built-in radio” section on page 31. Note : • To prevent hum interference, do not place this unit near a television receiver. Headphones • Before plugging in or unplugging the headphones, make sure the volume level is reduced. • Be sure your headphones have a 3.5mm (1/8”) diameter plug and are between 16 . and 50 . impedance. The recommended impedance is 32 .. • When headphones are connected, the speakers are disconnected automatically. Adjust the VOLUME CONTROL for the desired volume. 36 EN RESETTING THE MICROCOMPUTER SOUND MODEON/ STANDBY 7 STOP TRANSPORTING THE UNIT Reset the microcomputer under the following conditions : • To erase all of the stored memory contents (clock and timer settings, and tuner and CD presets). • If the display is not correct. • If the operation is not correct. 1 Press the ON/STANDBY button to enter the standby mode. 2 Whilst pressing down the 7 STOP button and the SOUND MODE button, hold down the ON/STANDBY button for at least 1 second. • “CLEAR AL” will appear. Caution : • The operation explained above will erase all data stored in memory including clock and timer settings, and tuner and CD presets. ON/ STANDBY CD 0 OPEN/CLOSE Before you move this product to a new location, proceed as follows : 1 Press the ON/STANDBY button to turn the power on. 2 Press the CD button. 3 Press the 0 OPEN/CLOSE button to open the disc tray. • Remove all CDs inserted in the unit. 4 Press the 0 OPEN/CLOSE button to close the disc tray. • Make sure that “NO DISC” is displayed. 5 Press the ON/STANDBY button to enter the standby mode and then unplug the AC power cord from the AC socket. 37 EN MAINTENANCE Note • There are precisely aligned parts around the heads, including the tape guides. When cleaning, pay special attention so as not to apply shock to them. Cleaning the heads and peripheral components For maintaining the best condition of the deck and for longer service life, always keep the heads, capstan and pinch roller clean. To clean them, perform the following: 1) Open the cassette holder. 2) Using a cotton swab dipped in alcohol, clean the head, capstan and pinch roller carefully. Demagnetizing the head When the recording / playback head is magnetized, the sound quality will deteriorate. In such a case, demagnetize the head using a commercially available demagnetizer (head eraser). Cotton swab Pinch roller Tape guides Head Capstan Maintenance of the unit When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. In regard to contact cleaner Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. Caution on condensation Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside.This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours and restart the operation after the condensation has dried up. Be specially cautious against condensation in following circumstances: When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc. WARNING NOTICE: In most cases it is an infringement of copyright to make copies of tapes or discs without the permission of the copyright owners. Anyone wishing to copy commercially available tapes or disc should contact the mechanical copyright protection society limited or the performing rights society limited. 38 EN SPECIFICATIONS (XD-855 / XD-855E / XD855 / XD-755 / XD-755E / XD755) Main Unit [Amplifier section] Rated power output (U.K. and Europe) 1 kHz, 0.7% T.H.D., 6 . ......(DIN) 120W + 120W (other countries) 1 kHz, 1% T.H.D., 6 .........(RMS) 122W + 122W Effective output power during STEREO operation 1 kHz, 10% T.H.D., 6 . ......(RMS) 150W + 150W Effective Music power (DIN) (One channel driven) (U.K. and Europe) ...................................................... 260W + 260W Signal to noise ratio VIDEO/AUX INPUT ..................... 88 dB (IHF’ 66) Input sensitivity / impedance VIDEO/AUX INPUT .................... 600 mV / 47 k. [Tuner section] FM tuner section Tuning frequency range ....... 87.5 MHz ~ 108 MHz MW (AM) Tuner section Tuning frequency range (U.K. and Europe) ............... 522kHz ~ 1,620kHz (Other countries) 9 kHz step ....................... 531kHz ~ 1,602kHz 10 kHz step ..................... 530kHz ~ 1,620kHz [Cassette deck section] Track ............................... 4-track, 2-channel stereo Recording system ........................ AC bias system (Frequency: 100 kHz) Heads A deck : Playback head ...............

Herunterladen

Geben Sie zwei Ziffern: