Stimmen - 5, Durchschnittliche Bewertung: 4.4 ( )

Hersteller: Kenwood Dateigröße: 1.8 mb Dateiname: Unterrichtssprache:

XD-SERIES (En) Application section 3Start the search. (Remote control unit only) PTY (Press the key again during search to cancel it.) O No sound is heard while “PTY” is blinking. . If a program of the desired type cannot be found, “NO PROG” is displayed, then after several seconds the display returns to the original display. . If a program of the desired type is found, that program is received and the program type name display changes temporarily to the frequency display, and then to the station name display. To change to a different program type : Repeat steps 1, 2, 3. When searching for a Rock Music broadcast Display while the tuner is searching. Program type name display. ROCK M RDS Blinks TP PTY EON TA NEWS When a station is received. Station name display. BBC. Goes off RDS TP PTY EON TA NEWS 40 R.D.S. 40 R.D.S. XD-SERIES (En) To be able to listen to the desired information at any time (EON) By using the EON function, which manages the information of other stations, listening to desired information like traffic information or news etc. can be reserved even when it is not being transmitted at the present. When listening to a station with the “EON”display lit and another station of the same network starts to broadcast an information program for which a reservation has been made, then that station will be selected automatically. When the desired information program ends, return is made to the original program. Set the reception band to FM. ¤ Application section 1Auto preset the stations. 1 Receive a broadcast. 2 Keep the TUNING MODE key pressed (2 sec or longer). BAND TUNING MODE (The EON data presently being broadcasted are taken in automatically.) 2Select the desired information. (Remote control unit only) TA/NEWS 3Receive an RDS station. Select a station where “RDS” and “EON” are lit. 4 . This is not required when auto presetting has already been executed. ¦ . When all 30 stations have already been preset by the procedure for“One-by-one presetting (manual preset)”, the EON function will not operate. Auto presetting must be used. Each press switches the modes as follows. 1 TA ........................ Traffic Announcement 2 NEWS .................. News 3 TA/NEWS............Traffic Announcement/ News 4 Display not lit......EON cancelled Lights with a station broadcasting traffic announcement programs. 01FM102.50 RDS TP PTY EON TA NEWS Lights when “NEWS” is selected . Please execute automatic presetting when TA and NEWS can not be selected. 02FM 90.00 RDS TP PTY EON TA “RDS” and “EON” are lit NEWS . When “EON” does not light although an RDS station is received, that station is not transmitting EON data. Please select a different station. . If you want TA programs, select the stations with which the “TP” indicator lights. 41R.D.S. 41R.D.S. XD-SERIES (En) 4Wait for the desired information. CD or tape playback may also be started. As long as the unit is ON, the unit is always ready for the reception. . When one of the stations of the network of the station received in 3 starts broadcasting the program contents selected in 2, that station will be received automatically. At this time, tape playback will stop and CD playback will pause. However, external equipment (MD/DVD) will remain as it is. . The EON function does not operate during recording (including dubbing). OWhen the transmission of the selected program contents ends in case of automatic reception with the EON function, return will be made to the status directly before operation of the EON function. When tape or CD playback has been interrupted, it will be continued from the point of interruption. Waiting for information while a RDS station without EON function is tuned If the EON indicator does not light with the RDS station in steps 3 and 4, the tuner will wait for only the desired information broadcast from the tuned RDS station provided that the desired information has been selected in the previous step. TP (Traffic Program) indicator The lighting of the TP indicator indicates that the currently tuned station or a station in the same network as it broadcasts traffic announcement programs. If the TP indicator already lights with the current station, you can listen to the traffic announcement program through the station without making reservation with the EON function. Application section 42 Convenient CD recording 42 Convenient CD recording XD-SERIES (En) Selection of the Recording Type With this unit, the following edit recording is NoteNoteNote Note that this cassette deck cannot record onto possible according to the purpose. Metal tapes. If you want to select the track to be recorded while playing a CD Recording only desired titles e Perform this operation when a track you want to record starts during CD playback. This starts recording of the track from the beginning. \CD ONE TRACK RECORDING If you want to record a CD in order of track numbers Recording of an entire CD r Perform the “CD DIRECT RECORDING” operation while the CD player is in stop m...

Herunterladen

Geben Sie zwei Ziffern: