Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Fotos und technische Daten Panasonic SC-SP100 |
Anleitung Zusammenfassung
iPhone Use an appropriate iPhone adaptor when playing an iPhone. 3 Connect the iPod or iPhone to the main unit. Hold the main unit when connecting or disconnecting the iPod or iPhone. iPod (not included) iPod dock adaptor (not included) When removing, insert your fingernail or a flat object and lift upwards. RQTX1009 8 Listening to the iPod or iPhone Listening to the iPod or iPhone Main unit Remote control signal sensor BASS indicator SURROUND indicator Power indicator You can navigate the iPod or iPhone using the buttons described. The power indicator blinks each time a button on the remote control is pressed. Main unit Remote control Function Turn the main unit’s power on or off. • The power indicator lights up when the main unit is on. • The operation switch does not separate entire unit from mains even if in off position. Adjust the speakers’ volume level. Turn the surround effect on or off. • The SURROUND indicator on the main unit button lights up when the surround function is activated. Turn the bass effect on or off. • The BASS indicator on the main unit button lights up when the bass function is activated. ENGLISH Remote control Remote control Function Access the menu screens. Playback or pause the iPod or iPhone. Select the repeat mode of iPod or iPhone. Select the shuffle mode of iPod or iPhone. Mute the sound from the speakers. To cancel: Press the button again or adjust the volume. Remote control Function Press to skip to the previous or next track. Press and hold to backward or forward search for the desired track. Select an item on the menu screen. Press and hold: Scrolls through the list. Confirm the selected menu or playback. Note: For iPod or iPhone operation details, please refer to iPod or iPhone User’s Manual. RQTX1009 9 Using other equipmentConnecting to the PCUsing other equipmentConnecting to the PC ENGLISH RQTX1009 10 While the iPod or iPhone is connected to the main unit, you can transfer data from the PC using the USB connectivity. Rear view USB cable (not included) 1 Connect the USB cable to the USB port of the main unit and PC. Refer to iPod or iPhone User’s Manual on PC synchronisation. 2 Before disconnecting the USB cable, make sure the procedure of safe eject of hardware from the PC is performed. Recording and operating problems may occur on some computer systems. Please note that Panasonic and Panasonic dealers cannot be held liable for any lost data or other direct or indirect damage except in cases of intentional or gross negligence. Preparation • Ensure that the iPod or iPhone is not connected to the main unit. • Ensure that the other equipment is completely set up and its volume reduced before connecting to the main unit. Portable audio equipment (not included) Rear view Audio cable (included) Connect the other equipment such as a portable audio equipment, etc. to the MUSIC PORT using the supplied audio cable. Avoid interfering with other Panasonic equipment You can operate this unit using a different mode. The main unit and remote control must be set to the same mode. 1 Press and hold [SURROUND] on the main unit and [BASS] on the remote control for at least 3 seconds. The power indicator flashes 3 times confirming the change. 2 Press and hold [OK] and [BASS] on the remote control for at least 2 seconds. To return to the default mode, repeat the above steps. For step 2, replace [BASS] with [MUTE]. Troubleshooting guide Specifi cations Troubleshooting guide Specifi cations Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the table do not solve the problem, consult your dealer for instructions. No power ENGLISH No sound Remote control is not functioning Distorted sound iPod or iPhone does not charge Unable to use PC synchronisation • Ensure the AC mains lead is connected properly. • Adjust the volume. • Check if mute function is enabled. • Update your iPod or iPhone with the latest software. • The iPod or iPhone was incorrectly inserted into the dock. Turn off the iPod or iPhone, remove it from the dock connector. Reinsert it and turn it on again. • Replace the battery. • Ensure the iPod or iPhone is seated properly into the unit. • Reduce the volume. • Set the “EQ” setting of the iPod to “Off” or “Flat”. • Check the connections. (\ page 8) • Turn the main unit on. • Check PC and iPod or iPhone connections. (\ page 8, 10) Maintenance To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. AMPLIFIER SECTION RMS output power stereo mode Front Ch (both channels driven) 5 W per channel (6 .), 1 kHz, 10% THD Subwoofer Ch 10 W per channel (6 .), 100 Hz, 10% THD Total RMS stereo mode power TERMINALS SECTION Music port (rear) Sensitivity Terminal SPEAKER SECTION Front speakers Speaker unit(s) Full range Input power (IEC) Subwoofer Speake...
Dieses Handbuch ist für folgende Modelle:Car Audio - SCSP100EG (3.89 mb)