Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten LG MDT364 |
Anleitung Zusammenfassung
To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. in NIGERIA POWER: This unit operates on a mains supply of 200-240V, 50/60Hz. WIRING : This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 3 amp. When replacing the fuse always use a 3 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below: WARNING: A mains plug removed from the mains lead of this unit must be destroyed. A mains plug with bared wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol or coloured green or green and yellow. If any other plug is fitted, use a 3 amp fuse, either in the plug, or at the distribution board. IMPORTANT: The wires in this mains lead are coloured in accordance with the fol lowing codes: -BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this unit may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. MDS714-A0U_FOUANI_ENG_5769.indd 2 2009.7.27 9:18:48 AM 3 Safety Precaution 2 Contents 3 Setting up 4 Hooking up the unit 5 Main Unit 6 Remote control 7 OSD Initial language setting - Optional 8 Initial Setting the Area Code 8 Adjust the general settings 8-10 Setting the sound mode 10-11 Setting the clock 11 Displaying Disc Information 12 Playing a Disc 12-14 Viewing photo files 14 Listening to the radio 15 Listening to the cassette tapes 15 Listening to music from your portable player or external device 16 Using an USB device 16 Power Save Mode You can set up the unit into an economic power save mode. In power-on status, press and hold 1/\ button for about 3 seconds. - Nothing is displayed in the display window when the unit is turned off. To cancel, press 1/\. Recording to USB 17 Recording to TAPE 18 Synchronized Recording from CD to TAPE 18 Language Codes 19 Area Codes 19 Troubleshooting 20 Types of Playable Discs 21 Specifications 22 Contents 3 Safety Precaution 2 Contents 3 Setting up 4 Hooking up the unit 5 Main Unit 6 Remote control 7 OSD Initial language setting - Optional 8 Initial Setting the Area Code 8 Adjust the general settings 8-10 Setting the sound mode 10-11 Setting the clock 11 Displaying Disc Information 12 Playing a Disc 12-14 Viewing photo files 14 Listening to the radio 15 Listening to the cassette tapes 15 Listening to music from your portable player or external device 16 Using an USB device 16 Power Save Mode You can set up the unit into an economic power save mode. In power-on status, press and hold 1/\ button for about 3 seconds. - Nothing is displayed in the display window when the unit is turned off. To cancel, press 1/\. Recording to USB 17 Recording to TAPE 18 Synchronized Recording from CD to TAPE 18 Language Codes 19 Area Codes 19 Troubleshooting 20 Types of Playable Discs 21 Specifications 22 Contents Setting up Attaching the speakers to the unit Connect the black end of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus). To connect the cable to the each speakers, press each plastic finger pad to MDD264 (2 channel) open the connection terminals on the back of each speaker. Insert the wire and release the finger pad. MDS714 (5.1 channel) Grey Red Green Orange Blue White Rear Front Center Sub Woofer Rear Front Behind you and to your right. In front of you, to the right of the screen. Above screen, directly in front of you. This can be placed in any front position. Behind you and to your left. In front of you, to the left of the screen. POSITION SPEAKERCOLOUR *speaker duct. * Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure). Red White Front Front In front of you, to the right of the screen. In front of you, to the left of the screen. POSITION SPEAKERCOLOUR Be careful of the following •Be careful to make sure children not to put their hands or any objects into the Remote control Operation Point the Remote Control at the display window and press the buttons. Remote control Battery Installation 1 Detach the battery cover on the rear of the remote control 2 Insert the R03 (size AAA) battery with 3 and # aligned correctly. MDT364 (2.1 channel) POSITION SPEAKERCOLOUR Red White Orange Front Front Sub Woofer In front of you, to the right of the screen. In front of you, to the left of the screen. MDS714-A0U_FOUANI_ENG_5769.indd 4 2009.7.27 9:18:48 AM Hookin...