|
Anleitung Zusammenfassung
This is normal and is not a sign of malfunction. TV stops responding to controls • If the TV stops responding to the controls on the remote control or TV front panel touchpad and you cannot turn off the TV, press and hold the POWER button on the TV front panel for 5 or more seconds to reset the TV. Other problems • If your TV’s problem has not been addressed in this Troubleshooting section or the recommended solution has not worked, use the Restore Factory Defaults procedure as described on page 52. 98 98 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. HM95_R2_097-102_061505 98 6/27/05, 8:15 PM (E) 46/52/62HM95 Chapter 10: Troubleshooting LED indications The green and red LEDs on the TV front touchpad (to the left of the POWER button) indicate the TV’s status, as described below. • Red ON (solid) and Green OFF = The TV power cord is plugged in. • Green ON (solid) and Red OFF = A recording is in progress while the TV is OFF. • Red ON (solid) and Green ON (solid) = A recording is in progress while the TV is ON. • Green and/or Red blinking (see table below). Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the green LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction. MENUVOLUMECHANNELEXITTV/VIDEOPOWERRed LEDTV front touchpad Green LED LED Indication Condition Solution 1) Green blinks continuously at 3-second intervals. Red blinks continuously at 0.5-second intervals. 2) Green blinks continuously at 0.5-second intervals; Red is ON (solid). 3) Green and Red blink continuously at 1-second intervals. 4) Green is OFF; Red blinks at 0.2-second intervals 4 times (repeat). 5) Green is OFF; Red blinks continuously at 0.5-second intervals. 6) Green is OFF; Red blinks continuously at 1-second intervals. 7) Green is OFF; Red blinks at 0.2-second intervals 3 times (repeat). The lamp unit door is not seated properly. The lamp is not working properly. The lamp is not working properly after the eighth automatic restart (see item #2). An abnormal temperature increase has occurred. Abnormal operation (including cooling fan stop). Abnormal operation of BUS line. The color wheel has stopped. Turn OFF the TV and unplug the power cord. Review “How to replace the lamp unit” on pages 104–105 to ensure that the lamp door is installed securely. If the problem persists, contact a Toshiba Authorized Service Center. The TV will automatically try to restart itself eight times (see item #3). Turn the TV OFF and then ON again. If the problem persists, replace the lamp unit (see pages 103–105). If the problem still exists, contact a Toshiba Authorized Service Center. Turn OFF the TV. Check to make sure all slots and openings in the TV cabinet are not covered, blocked, or dusty. Turn ON the...
Dieses Handbuch ist für folgende Modelle:Fernseher - 46HM95 (4.61 mb)
Fernseher - 62HM95 (4.61 mb)
Fernseher - 46HM95 (4.61 mb)
Fernseher - 52HM95 (4.61 mb)