Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
The display before sound quality adjustments were started is restored after a moment. To release the equalizer Turn [SOUND CONTROL JOG] to select "FLAT’. rgni •The sound quality setting is stored automatically. It is recalled when “MANUAL” is next selected. •All recordings are performed at the flat setting even if an alternative sound quality setting has been selected. RQT5067 © [HEAVY] ^-7 77 QT ISOFBr-i .1—i.i—I .—i.~ £=!’..—I •a-• eg- C? .—■—i Ti&HARP] aOÙA vO& COMTB°V COWTR0'" ^ COMTBO^ Varying the sound quality with the acoustic image (Al) equalizer (3D Al EQ) It is possible to use the acoustic image equalizer (Al EQ) together with the surround effect to create your own sound effect. The Al EQ equalizer uses the SOFT, SHARP. HEAVY and LIGHT sound quality coordinates to achieve subtle sound quality settings with ease. n Press [3D Al EQ] to adjust the surround level. Every time you press the button; Al EQ—>3D AM—»3D AI2 0 Operate Joystick to adjust the sound quality. 0 <—» direction: SOFT-SHARP setting (D 1 Î direction: LIGHT-HEAVY setting Repeat steps © and © to set the desired sound quality. The display before sound quality adjustments were started is restored after a moment. To release the equalizer Turn [SOUND CONTROL JOG] to select “FLAT". •The sound quality setting is stored automatically. It is recalled when “Al EQ" is next selected. •All recordings are performed at the flat setting even if an alternative sound quality setting has been selected. •“3D Al 1” and “3D Al 2” cannot be selected when playing a source recorded with Dolby Digital, Dolby Pro Logic or when any surround effect is in use. (except for “MIX 2CH” mode) RQT5067 Sound quality/sound field operations Sound qualify/sound field operations Surround systems • Select the surround mode appropriate to the source you are using. Read the following explanations to aid your selection. This system cannot play DTS discs. This system doesn’t have DTS decoder, so you cannot enjoy the disc encoded with DTS. Surround system Features Recognizing the sound sources and software that can be used DOLBY DIGITAL • Dolby Digital is a discrete 6 (5.1) channel surround system developed for cinema use. The sound signals in Dolby Digital format are compressed to 1/10 their original size, allowing an entire movie to be recorded on a single DVD. •This unit has built-in Dolby Digital circuity so you can enjoy Dolby Digital Surround by connecting the speakers. •Connect a subwoofer (not included) to the line out terminal on the rear panel of this system to increase the effect. Discs with the following mark are recorded in Dolby Digital: • DVD ПП Í dolby] DIGITAL DOLBY PRO LOGIC •This system was developed to get a better sense of presence from sources encoded with Dolby Surround. •This unit has built-in Dolby Pro Logic circuity so you can enjoy Dolby Surround by connecting the speakers. •The feeling of position has been improved by the addition of a separate center speaker channel. Software with the following mark is recorded in Dolby Pro Logic: • Laser Disc • DVD •Video tape •CD □ □ I DOLBY SURROUND This mode cannot be used with the radio. 40 RQT5067 SUPER SURROUND MOVIE mode MUSIC mode SIMULATED STEREO •This mode adds surround effects to movie software that isn’t recorded with the above systems. In MOVIE mode you can adjust the volume of the surround speakers. •This mode adds surround effects to normal music sources. •This mode adds stereo-like effects to monaural sound sources. Any general sound source can be used. •CD •Tape • Video tape This mode cannot be used with the radio. Any general sound source recorded in monaural can be used. •CD •Tape •Video tape This mode cannot be used with the radio. Add these audio effects to improve the experience •Check the set-up of your speakers. Set your speakers up to suit the surround mode you have selected to get the best surround eflect. These modes cannot be used with the radio. Virtual rear surround effect •This mode is useful if you have to place your surround speakers on the front speakers because of the room’s layout. •This mode makes it seem like the sound from the surround speakers is coming from behind you. • It is effective when using DOLBY DIGITAL, DOLBY PRO LOGIC, or SUPER SURROUND (MOVIE) mode. (The “VIRTUAL REAR SURROUND” indicator turns green.) Multi rear surround effect •Through processing of the surround sound signals, this mode makes it seem like there are multiple surround speakers in your room. •This mode increases the cinema-like sense of presence. • It is effective when using DOLBY DIGITAL, DOLBY PRO LOGIC, or SUPER SURROUND (MOVIE) mode. (The “MULTI REAR SURROUND” indicator turns green.) Center focus effect •This mode makes it seem like the sound from the center speaker channel (dialogue, etc.) is coming from within the television. •The center speaker must be placed on top of the television. • It is effecti...