. . . . . . . . .2–4 Operating Instructions Additional Features . . . . . . . . . . . . .9 Automatic Icemaker . . . . . . . . . . .12 Controls . . . . . . . . . . . . . . . . . . . .5, 6 Crispers and Pans . . . . . . . . . . . . .10 Freezer . . . . . . . . . . . . . . . . . . . . . .11 Shelves and Bins . . . . . . . . . . . . .8, 9 Water Filter . . . . . . . . . . . . . . . . . . .7 Care and Cleaning . . . . . . . .13–15 Installation Instructions Installing the Refrigerator . . . .17–21 Installi

Plasticized fin coil and air circulating fans are contained within a concealed “plug” type insulated housing, readily accessible on the top of the cabinet and separate from the food zone to increase food storage capacity. The entire “plug” system is fully charged with environmentally safe R-404A refrigerant and mounted on a sturdy steel, rail type base, which can be easily removed if refrigerator conversion is desired. Freezers are designed to maintain 0° Fahrenheit (-18° Centigrade) while opera

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. ZIFS360NXRH, Freezer Handle on the left side, the door swings left to right. ZIFS360NXLH, Freezer Handle on the right side, the door swings right to left. Caution These units are top-heavy and must be secured to prevent the possibility of tipping forward. Anti-Tip protection is required. The water and electrical supply must be located as shown. The f

• Side panels are required whenever the sides of the product are exposed. • Side panel sizes vary depending on the type of installation being made. To accomplish an attractive installation, you must: 1. Determine the need for side panels. 2. Determine side panel thickness. 3. Order matching side panels from the cabinet manufacturer. Be sure to provide the exact dimensions. Monogram built-in refrigerators and freezers can be installed flush with typical 24-3/4" deep cabinetry. When installed semi

539 Dunksferry Road Bensalem, PA 19020 (800) 523-7138 Fax: (215) 244-9579 FEGD810

C ontinental Refrigerator EXTRA WIDE DIPSLAY FREEZERS Standard Features 1FE-GD 2FE-GD Modern, State-of-the-Art Styling Performance Rated Refrigeration System Designed for 0°F Cabinet 3" Non-CFC Polyurethane Foam Insulation Cam-Action Lift-Off Hinges Self-Closing Doors Magnetic Snap-In Door Gasket Cylinder Lock in Each Door Automatic Electric Condensate Evaporator 5" Casters Heavy-Duty, Epoxy-Coated Steel Shelves External Dial Thermometer Triple-Pane, Tempered Hinged Glass Doors Fluoresce

Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width. • The water and electrical locations for each product must be located as shown. • A separate 115V, 60Hz., 15 or 20 amp power supply is recommended for each product. 25" Min. to Wall 0" 25" Min. to Wall130.Door Swing 130.Door Swing Clearances for Multiple Single Door Installations In a side-by-side installation of a left and right door swing product, the

FREEZERS ROLL-IN FREEZERS EXTENDED HEIGHT (72" CART CAPACITY) Utilizing Environmentally Safe, CFC-free R-404A Refrigerant DL1FI-SS-E DL3FI-SS-E DL2FI-SS-E Standard (S/S Front, Aluminum Ends & Interior) Suffix SA (S/S Exterior, Aluminum Interior) Suffix SS (S/S Exterior & Interior) Standard Features •Modern, State-Of-The-Art Styling •Performance Rated, “Plug” Refrigeration System Utilizing Environmentally Safe R-404A Refrigerant •3" High Density, Non-CFC Polyurethane Foam Insulation •Chrome-Plate

to 84-1/2" max. height. Note: the top case trim at the front is 1/2" higher and will overlap upper cabinetry or soffit. Use leveling legs and wheels for a maximum 1" height adjustment. Product Clearances These units are equipped with a 2-position door stop. The factory set 130. door swing can be adjusted to 90. if clearance to adjacent cabinets or walls is restricted. Order WX14X99 door stop for precise settings between 90.and 130.. 25" Minimum to Wall 130.Door Swing 90.Door Swing 23-7/8" Behind

Insert the hooks at the back of the drawer railings into the slots on the rail assemblies. Lower the front of the drawer, making sure the tabs on the sides of the railings fit into the front slots in the rail assemblies. 1 A B D C REPLACE THE FREEZER BASKET Replace the lower freezer basket by lowering it into the frame. 2 Two people may be required to complete this procedure. ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES (cont.) Replace the Phillips head screws on both rail assemblies. 1 Slot