Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Continental Refrigerator Dateigröße: 1.01 mb Dateiname: Unterrichtssprache:

Insert the hooks at the back of the drawer railings into the slots on the rail assemblies. Lower the front of the drawer, making sure the tabs on the sides of the railings fit into the front slots in the rail assemblies. 1 A B D C REPLACE THE FREEZER BASKET Replace the lower freezer basket by lowering it into the frame. 2 Two people may be required to complete this procedure. ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES (cont.) Replace the Phillips head screws on both rail assemblies. 1 Slot Rail assembly Slot Tab Hook E Phillips Screw Installation Instructions REVERSING THE DOOR SWING TOOLS YOU WILL NEED IMPORTANT NOTES When reversing the door swing: • Read the instructions all the way through before starting. • Handle parts carefully to avoid scratching paint. • Set screws down by their related parts to avoid using them in the wrong places. • Provide a non-scratching work surface for the doors. IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed. These instructions are for changing the hinges from the right side to the left side—if you ever want to change the hinges back to the right side, follow these same instructions and reverse all references to left and right. Unplug the refrigerator from its electrical outlet. Empty all door shelves, including the dairy compartment. Putty Knife or Thin-blade Screwdriver Masking Tape Adjustable Wrench 3/8. Head Socket Driver (a 6-point socket is recommended) REMOVE THE REFRIGERATOR DOOR Tape the door shut with masking tape. Remove the hinge cover on top of the refrigerator door by squeezing it and pulling it up. Using an adjustable wrench, remove the bolts securing the top hinge to the cabinet. Then lift the hinge straight up to free the hinge pin from the socket in the top of the door. Remove the tape and tilt the door away from the cabinet. Lift the door off the center hinge pin. Set the door on a non-scratching surface with the inside up. 1 A B C D E Hinge Cover Top Hinge 24 Installation Instructions REMOVE THE CENTER HINGE PIN On models with a freezer door, tape the door shut with masking tape. Using an adjustable wrench, remove the center hinge pin. 2 A B REMOVE THE FREEZER DOOR (freezer door models) Remove the tape and tilt the door away from the cabinet. Lift the door off the bottom hinge pin. NOTE: There is a plastic washer between the hinge and the top of the freezer door. Do not lose. Set the door on a non-scratching surface with the inside up. 3 A B REMOVE CENTER HINGE Using an adjustable wrench and Phillips head screwdriver, remove the bolts and screws securing the center hinge to the cabinet. Set hinge, bolts, screws, washer (on freezer door models) and hinge pin aside. On models with a freezer drawer, skip to Step 7. 4 TRANSFER BOTTOM HINGE BRACKET (freezer door models) Remove the base grille by grasping it at the bottom and pulling it straight out. Using a 3/8. socket driver, remove the screws securing the bottom hinge bracket to the cabinet. Using an adjustable wrench, remove the hinge pin and washer(s) from the right side of the bracket and install on the left. Using a 3/8. socket driver, remove the leveling leg bracket from the bottom left side of the cabinet and install it on the right side. 5 A B C D Washer(s) Left Side Right Side 25 Installation Instructions REVERSING THE DOOR SWING (cont.) TRANSFER BOTTOM HINGE BRACKET (freezer door models, cont.) Install the bottom hinge bracket on the left side of the cabinet. Remove the insert at the top left side of the base grille and install it on the right side. Replace the base grille by aligning the prongs on the back of the grille with the holes in the cabinet. Push forward until the grille snaps into place. 5 E F G 6 A B C TRANSFER FREEZER DOOR STOP (freezer door models) Remove the door stop on right side of the bottom of the freezer door by removing the two screws. Move the plastic hinge hole thimble to the opposite hole. Install the door stop on the left side. A Bottom of Freezer Door (Right Side) Bottom of Freezer Door (Left Side) 26 Installation Instructions INSTALL CENTER HINGE Transfer the plug button and screws in the hinge holes on the left side to the right side. Install the center hinge on the left side. 7 A B INSTALL CENTER HINGE PIN Install the center hinge pin. NOTE: On models with a freezer door, be sure to put the washer between the top of the freezer door and the bottom of the center hinge. 9 A HANG THE FREEZER DOOR (freezer door models) Lower the freezer door onto the bottom hinge pin, then shut the door, making sure to align the door with the cabinet. Make sure the gasket on the door is flush against the cabinet. 8 Freezer Door Models Freezer Drawer Models TRANSFER REFRIGERATOR DOOR STOP Remove the door stop on right side of the bottom of the refrigerator door by removing the two screws. Move the plastic hinge hole thimble to the opposite hole. Install the door stop on the left side, making sure to line up the screw holes in the door stop wit...

Herunterladen

Geben Sie zwei Ziffern: