Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width. • The water and electrical locations for each product must be located as shown. • A separate 115V, 60Hz., 15 or 20 amp power supply is recommended for each product. 25" Min. to Wall 0" 25" Min. to Wall130.Door Swing 130.Door Swing Clearances for two products installed side-by-side with right and left side hinges together Clearances for Multiple Single Do

25" Minimum to Wall 130.Door Swing 90.Door Swing 23-7/8" Behind Frame 36-3/4" 5" Min. to Wall Allow 25" minimum clearance for a full 130. door swing. Allow 15" for pan removal. for a 90. door swing, allow 5" minimum clearance for professional models. If the 90. doorstop position is used, pan access is maintained but pan removal is restricted. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. ZIFP360

• The water and electrical locations for each product must be located as shown. • A separate 115V, 60Hz., 15 or 20 amp power supply is recommended for each product. 25" Min. to Wall 0" 25" Min. to Wall130.Door Swing 130.Door Swing Clearances for Multiple Single Door Installations In a side-by-side installation of a left and right door swing product, the inside trims touch at the front, with a 1" clearance between the units at the rear. Order ZUG2 Unified Grille Panel 5" Kit for one continuous gr

This kit provides for a unified custom grille panel to span the width of two units using a 1/4" framed or 3/4" overlay panel. ZPBS360, Black and ZPSS360 Stainless Steel Accessory Panel Kits These accessory panels are cut to size and ready to install. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Overlay Panel 1/4" Backer Panel Door/ Drawer .10" Spacer Spacer Panel Overlay Panel Backer Panel List

In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling colls and will void toe warranty. We recommend using a plastic scraper. • Use a sponge or towel to pick up the melting ice off the freezer floor. • Remove the frozen food from the freezer and place it in a cooler to protect the food. > The Freezer Compartment • This compartment Is designed for the long-term storage of frozen food. • The storage life of frozen foods varies and the recommended s

Junked or abandoned freezers are still dangerous... even if they will “just sit in the garage a few days.” Before you throw away your old refrigerator or freezer: Take off the doors. Leave the shelves in place so that children may not easily climb inside. Never allow children to operate, play with, or crawl inside the freezer. Never clean freezer parts with flammable fluids. The fumes can create afire hazard or explosion. Do not store or use gasoline or any other flammable vapors and liquids

The freezer temperature control is set at "0FF". Compressor turns on and off frequently. The room temperature is hotter than normal. A large amount of food has been added to the freezer. The door is open too often. The door is not closed completely. The temperature control is not set correctly. The door gasket does not seal properly. The freezer does not have the correct clearances. Vibrations. Check to assure that the freezer is level. The freezer seems to make too much noise. The rattling nois

? The cord should be secured behind the freezer and not left exposed or dangling to prevent accidental injury. • Door Lock Your unit is provided with a lock and key combination. The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping. • Reversing the Do

Avanti Products, A Division of The Mackle Co., Inc. P.O. Box 520604 - Miami, Florida 33152 TABLE OF CONTENTS Freezer Safety 3 Important Safe Guides 4 Help Us Help You 5 Parts and Features 6 Important Safety Instructions 7 Electrical Connection 8 Installation Instructions Before Using Your Freezer 9 Installation of Your Freezer 9 Operating Your Freezer 9 Temperature Control 9 Defrosting Your Freezer 9 The Freezer Compartment 10 Care and Maintenance 10 Cleaning Your Freezer 10 Vacation Time 10 Mov

If you received a damaged freezer, immediately contact the dealer (or builder) that sold you the freezer. Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself. 6 PARTS AND FEATURES 1. TEMPERATURE CONTROL 2. POWER INDICATOR LIGHT 3. ALERT LIGHT 4. FAST FREEZE LIGHT 5. FAST FREEZING SWITCH 6. SMALL COMPARTMENT (ICE TRAY – HOT DOGS – BACON) 7. PULL DOWN COVER 8. 5 CLEAR VIEW REMOVABLE DRAWERS 9.