Doing so may damage it and voids your warranty. • Keep drinks and drops from umbrellas away from the set. Water may damage the internal circuitry. • Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 41° - 104° F.) muaisiuiiiuziu • In extremely cold temperatures, the movement of the picture may be slow and t

7 English Display mode setting To choose the proper display mode for the different video sources, please refer to display mode setting below. 1. Press MENU several times until you reach the DISPLAY MODE option. 2. Press Ў (down key) or ^ (up key) to select the display mode for: NORMAL, FULL WIDE, and WIDE. 3. WIDE may stretch the image to fill the entire screen, NORMAL displays the image at its true aspect ratio (4: ), FULL WIDE stretches the image horizontally to fit the screen for aspect ratio

CONTENTS 1. Key Product Features ...............................................................................................................2 Safety Information.......................................................................................................................3 2. DVD Video Features ..................................................................................................................4 Controls and Functions ......................................................

The initial factory default setting is the RGB input. NOTE: The LED will be green under normal signal input. If no input signal is detected the monitor will display a flashing error message for that particular source. The LED will turn orange upon entering the power saving mode after five seconds. Choose the proper input source by pressing the Input Select Button on the front of the monitor. NOTE: In some cases, if the RGB, Video, or S-Video signal is low, the LED will turn orange and enter a po

5. The sole responsibility of Clarion Corporation under this Warranty shall be limited to the repair or replacement thereof, at the sole discretion of Clarion Corporation. 6. If it becomes necessary to send the product or any defective part to Clarion Corporation or an authorized warranty service station, the product must be shipped in its original carton or equivalent carton, fully insured, with shipping charges prepaid. Clarion Corporation will not assume any responsibility for any loss or dam

3 2. Features ...................................................... 3 3. Names of the Buttons.................................. 4 4. Operations................................................... 4 5. Connections................................................. 7 6. Installation ................................................... 8 7. Troubleshooting........................................... 9 8. Specifications .............................................. 9 This unit has been tested and found

Doing so may damage the vehicle’s battery or the multimedia system. • Do not disassemble or modify monitor. Doing so may damage it and void the warranty. • Keep moisture away from the set. Water and humidity may damage the internal circuitry. • Do not let the monitor become overheated. If the temperature inside the vehicle is high or the monitor has been exposed to direct sunlight, lower the monitor’s temperature before use. (The liquid crystal panel operates within a temperature range of -1~

• Do not let the monitor become overheated. If the temperature in the vehicle is high or the monitor has been exposed to direct sunlight, cool the monitor ( such as, by running the air conditioning ) before you turn it on. • Keep all liquids, including beverages and cleaning fluids away from the monitor. Liquids in the monitor can damage the electronics and result in electrical shock or fire . If the unit becomes wet, turn off all power and contact an authorized Clarion dealer to have the monito

• Keep drinks and drops from umbrellas away from the set. Water may damage the internal circuitry. • Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 14°F - 144° F). • In extremely cold temperatures, the movement of the picture may be slow and the picture may be dark, but this is not a malfunction. The set wil