Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
The initial factory default setting is the RGB input. NOTE: The LED will be green under normal signal input. If no input signal is detected the monitor will display a flashing error message for that particular source. The LED will turn orange upon entering the power saving mode after five seconds. Choose the proper input source by pressing the Input Select Button on the front of the monitor. NOTE: In some cases, if the RGB, Video, or S-Video signal is low, the LED will turn orange and enter a power saver mode after five seconds. This may happen if you are viewing a TV station with a very weak signal. Press the Power button on the front of the monitor to exit the power saver mode. Operation 3 VMA1891 18.1O TFT LCD Color Monitor VMA1891 18.1O TFT LCD Color Monitor OSD OPERATION DESCRIPTIONS: 1. Press the OSD Menu button 3to display the on-screen menu. Press the UP 2 or DN 1 button to scroll forward or backwards for each monitor settings. 2. Press the OSD Menu button 3again to select the function. See list below for individual function operations. OSD Operation 96 OSD FUNCTIONS AND OPERATIONS: Icons Sub Menus Function Operation Brightness None Intensity of white light. Use UP/DN buttons to increase or decrease the level. Press the OSD display button twice to exit the function. Contrast None Ratio of black to white Use UP/DN buttons to increase or decrease intensity. the level. Press the OSD display button twice to exit the function. Color 1) Red Intensity of Red color Use UP/DN buttons to select the adjustment 2) Green Intensity of Green color Sub Menu. Press the OSD button again. Use 3) Blue Intensity of Blue color the UP/DN buttons to increase or decrease the level. Press the OSD display button to save and exit to the Main Menu. Position & 1) H-Position Horizontal screen position Use UP/DN buttons to select the adjustment Quality 2) V-Position Vertical screen position Sub Menu. Press the OSD button again. Use 3) Frequency Vertical flicker the UP/DN buttons to increase or decrease 4) Phase Horizontal flicker the level. Press the OSD display button to save and exit to the Main Menu. Recall 1)Factory setting Recalls the factory settings Use UP/DN buttons to select the adjustment Yes/No Sub Menu. Press the OSD button again. Use 2) 9300° K Chromaticity coordinate the UP/DN buttons to select choice. Press the 3) 6300° K according to CIE 1931. OSD button again to save. Select Exit, then 4) Exit Exits Function press the OSD button to exit the Main Menu. 4 OWNEROS MANUAL OSD FUNCTIONS AND OPERATIONS: Icons Sub Menus Function Operation Auto 1) All Auto Sets all functions Use UP/DN buttons to select the appropriate Adjust 2) Auto Position Auto Screen Position Sub Menu. Press the OSD display button to 3) Auto Phase Auto Phase settings activate the automatic function. Select Exit, 4) Exit Exits and Auto Saves then press the OSD button to exit the function Input 1) RGB Input for PC Use UP/DN buttons to select the appropriate Source 2) Video (RCA) Input for Composite Video Sub Menu. Press the OSD display button to 3) S-Video Input for High quality enter the input type. If no signal is present, video (such as DVD) an error message will appear. Display 1) Normal Normal 4/3 Mode Use UP/DN buttons to select any adjustment Size 2) Expand Widescreen mode 16/9 Sub Menu. Press the OSD display button to 3) Full Fills the height and width save choice. Use UP/DN buttons to scroll to of the screen Exit in Main Menu. Press OSD button to exit Language 1) English 2) German Changes the OSD menu to the user’s preferred Use the UP/DN buttons to select the appropriate language. Press the OSD display 3) French language. button again to save the language and exit to 4) Italian the Main Menu. 5) Spanish OSD 1) OSD Timeout 15, 30, 45, 60 seconds Use UP/DN buttons to select the appropriate Control 2) OSD Position Hor. or Ver. Position Sub Menu. Press the OSD display button to 3) OSD Color Blue, Green, Cyan, Ma-enter the Sub Menu. Use the UP/DN button genta, None to scroll through the adjustment choices. 4) Exit Exits and Auto Saves Press the OSD display button to save the adjustment. Select Exit and press the OSD display button to exit to the Main Menu. Exit None Saves and Exits Main Use UP/DN buttons to select the Exit Menu. If OSD Timeout is function. Press the OSD display button again activated, the menu will to exit the Main Menu. disappear after timeout. TILTING THE MONITOR: Gently hold the top and bottom of the monitor panel and tilt the monitor forward or backwards to achieve the desired viewing angle. Maximum tilt angle is 10° forward and up to 45° backwards. CARE AND MAINTENANCE: Cleaning the cabinet: • Use a soft, dry cloth and gently wipe off any dirt. For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. • Do not use liquid cleaners on any surfaces as they may damage the cabinet or cause the paint to peel. Also leaving rubber or plastic products in co...