Login:
heruntergeladen wurde: 2   Dateigröße: 593 kb   Hersteller: ConnectPRO  
Kategorie: Monitore
@name

Slide the rear brackets onto the aluminum extensions. And, then insert both slide rails of the assembled drawer into the tight space formed by the combination of the rear brackets and the aluminum extensions. The KVM module should be pushed in evenly on both right and left sides. StreamLine Console 8. Push the rear brackets all the way in and fasten them. 9. Slide the assembled drawer out. Push the KVM module box evenly toward the drawer, and then lock both units by the screws. 10. Make sure the

heruntergeladen wurde: 3   Dateigröße: 593 kb   Hersteller: ConnectPRO  
Kategorie: Monitore
@name

It features a 15” flat panel TFT display, keyboard and a touch pad. The drawer can be pulled out for operation from the rack on slides which latch in the extended position. When not in use, the display can be folded down, locked and secured while pushed in. With different Rear bracket & extension kit, the StreamLine Console can be mounted on rack cabinet of various depths. The console comes with standard PS/2 keyboard connector, PS/2 mouse connector and HDB15 VGA connector for computer or KVM sw

heruntergeladen wurde: 5   Dateigröße: 593 kb   Hersteller: ConnectPRO  
Kategorie: Monitore
@name

StreamLine Console ------------------------ ------------------------------------------------Introduction IntroductionIntroduction • Overview The StreamLine offers the ultimate in styling and computer management. With a keyboard, mouse, TFT LCD panel and an 8-port KVM switch housed in an industry standard 19" 1U-height rack drawer, it saves you up to 1/3 of valuable real estate from a rack cabinet. Better yet, when the StreamLine Console is cascaded with other StreamLine KVM switches to increase

heruntergeladen wurde: 0   Dateigröße: 835 kb   Hersteller: ConnectPRO  
Kategorie: Monitore
@name

Connect a third and fourth Switch in the same way. With the CAT5 KVM 16 Port model, connect up to up to 256 computers through cascading. You must define a hotkey to display the OSD of each Switch. These hotkeys must be different for the top and bottom layers. The hotkeys can be any of the choices as set out above on page 14. To add/change a hotkey: 1. On the line to which the Switch is connected, press Tab to jump to the HKEY column. 2. Toggle between the options using the Space bar. 24. The Tim

heruntergeladen wurde: 0   Dateigröße: 835 kb   Hersteller: ConnectPRO  
Kategorie: Monitore
@name

Welcome...............................................................................................................3 2. Introduction..........................................................................................................4 3. Features.................................................................................................................4 4. System components...............................................................................................4 5. Compatibili





Kategorien