Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1 To clean the LCD monitor screen: Turn off the LCD monitor and unplug the power cord.• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.• 2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. 3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature. 5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage. 6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur: Monitor-to-PC signal cable is frayed or damaged.• Liquid spills onto the LCD monitor or the monitor is exposed to rain.• The LCD monitor or case is damaged.• Package contents LCD monitor AC Power cable DVI cable (Optional) VGA cable HDMI cable (Optional) AC Adapter User guide Quick start guide Attaching the monitor to the base 1 Remove the monitor base from the packaging and place it on a stable and level workspace. 2 Remove the monitor from the packaging. 3 Attach the monitor stand arm to the base. Ensure that the base is locked onto the monitor stand arm. (for selected models)• Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin. (for • selected models) Connecting your monitor to a computer 1 Turn off your computer and unplug your computer’s power cord. 2 Connect the signal cable to the VGA and/or DVI-D (optional) and/or HDMI (optional) input socket of the monitor, and the VGA and/or DVI-D (optional) and/or HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector. 3 Connect one end of the adapter to the monitor and the other end to a properly grounded, AC outlet. 4 Plug the power cords of your computer and your monitor into a nearby electrical outlet. Panel controls No. Item Description 1 Power button / indicator Turns the monitor on/off. Blue indicates power on. Blinking blue indicates standby / power saving mode. 2 < / > button Press the < / > button to navigate to the desired function or to change the settings of the current function. 3 Menu / Enter button Press to view the OSD menu. Press it again to enter a selection in the OSD menu. 4 Auto / Exit button When the OSD menu is active, press this • button to exit the OSD menu. When the OSD menu is inactive, press • this button to activate the Auto Adjustment function. 5 Empowering Key Press this button to open the Acer eColor Management OSD and access the scenario modes. DC-IND-SUB 1 2 3 4 5 English Regulations and safety notices FCC notices This device ...
Dieses Handbuch ist für folgende Modelle:Monitore - S220HQL (655.29 kb)