Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
This mode limits the amount of TV controls (e.g. like volume limitation), that a normal user (i.e. hotel guest) can use. The amount of access can be configured in the setup menu by a super-user (e.g. hotel installer). This manual describes how to setup a television channels using Virgin Mode, configure other TV settings and activate the PBS mode. 2 REMOTE CONTROL 2.1 PBS Set-Up Remote control 2573 (optional) Note: Setup mode should be selected for hotel installer. 2.2 Guest Remote control 22AV1104/10 1. On/Standby Switches the TV on from standby or back to standby. 2. GUIDE (DVB-T) Toggles the Electronic Program Guide on or off. Only active with digital channels. 3. SOURCE Selects connected devices. 4. SUBTITLE (DVB-T) Activates or deactivates subtitles. 5. COLOUR KEYS Selects tasks or teletext pages. 6. ALARM OFF Disable Alarm status - Not applicable for this model. PB3 7. OK Accesses the All channels menu or activates a setting. 8. Navigate the menu. 9. SLEEP Display the sleep timer menu and adjust the sleep timer. 10. P +/- Switches to the next or previous channel. 11. NUMBER KEYS Selects a channel, page or setting. 12. Selects a picture format. 13. MHEG CANCEL Cancels digital text or interactive services (UK only). 14. Mutes or restores sound. 15. Increases or decreases volume. 16. MENU/EXIT Toggles the menu on or off. 17. ALARM ON Display the Alarm menu - not applicable for this model. 18. TELETEXT Toggles teletext on or off. 19. Splits the current channel or source on the left of the screen. Teletext appears on the right. PB4 3 INITIAL SETUP 1.1 Virgin mode – Out Of Box Setting and Initial Setup This TV set includes an installation feature that, at initial set-up of the TV, guides you through the installer menu to apply the proper installation settings. This feature, named Virgin Mode, active when the TV set is unpacked and first powered on, is normally used for installation/setting of first TV set. To save time during a complete setup for hospitality system with more televisions, the settings of this first TV set can be duplicated to other televisions using the cloning mechanism (described in chapters 4.6 and 4.7). Press OK or the green color key on your remote control to confirm Before setting PBS Mode to ON, and not using cloning as configuration mechanism, the television must be configured. Note: In case of cloning the TV settings, Virgin mode can be skipped by pressing the “Menu” button on the television twice. Follow the Virgin Mode guiding to set all channels/programs Digital Channels start at Program Number 1, Analogue Channels start at Program Number 900. Note:The channel list can be customized by hotel installer through Rearrange channel list feature as indicated below. Also rearrange channels can be easily done through using Rename Channels feature by PB5 entering direct channel numbers and channel name if needed. After setup/installation is completed, subsequent switching on the TV will not let this Virgin Mode menu to pop up again. For details refer to consumer TV User Guide. Preferred customer picture, sound and feature settings - these settings will be used whenever the TV is switched on from mains or standby in PBS Mode This can be achieved by popping up consumer TV setup menu as below and do Picture/sound setup and channel installation etc accordingly: Apart from manually adjusting picture settings, you can use Smart settings to set your TV to a predefined picture and sound setting. For details refer to consumer TV User Guide. The installer should change the TV to Home mode by select Install > Preferences > Location 4 DISPLAY SETUP MENUS The TV can display PBS Setup menu by pressing RC2573 MENU key in SETUP mode or by following Guest RC key sequence “319753 ”” key within 10 seconds if high security mode set to Off. The following menu appears. 4.1 PBS MODE To activate PBS Mode, select ON. 4.2 APPLICATION The Application to select is Hotel/Hospital or Business Monitor; this is based on the installer requirement. When APPLICATION is Hotel/Hospital, the limited Guest TV menu can be accessed by guest as below: Refer to consumer TV User Guide for the description of each menu item. When APPLICATION is BUSINESS MONITOR, the normal consumer TV setup menu can be accessed by using guest RC menu key with the additional control features listed in the PBS setup menu. PB6 4.3 SWITCH ON SETTINGS • SWITCH ON VOLUME - The TV will always switch on (via mains-switch or standby) to this preset value. The On volume setting cannot exceed the max volume. The current volume should follow the on volume, and adjusting on volume should also affect the current volume. • MAXIMUM VOLUME – refers to the maximum volume which the guest could adjust to. • SWITCH ON CHANNEL – choice of channel number (analog or digital) or an external video source to go to when the TV set is switched on from mains power or standby. In case of LAST STATUS setting, the set will switch to the last channel or source before the TV went to st...