Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
If using a screen saver, set it to the active screen mode. • If the size of your monitor is small, or if the same image is present for long periods of time, you may see afterimages due to damage to the fluorescent substance on the inside of the CDT. Do not use a damaged or loose plug. • This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wethands. • This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. • An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. • This may cause an electric shock or fire. Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. • This may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. • This may cause fire. Do not cover the vents on the monitor cabinet. ..Bad ventilation may cause a breakdown or fire. Put your monitor in a location with low humidity and a minimum of dust. ..An electric shock or fire could result inside the monitor. Do not cover the vents on the monitor cabinet. ..Bad ventilation may cause a breakdown or fire. Put your monitor in a location with low humidity and a minimum of dust. ..An electric shock or fire could result inside the monitor. Notational Power Installation Clean Others Do not drop the monitor when moving it. • This may cause damage to the product or human body. Place the monitor on a flat and stable surface. • The monitor may cause injury by falling. Set down the monitor carefully. • It could be damaged or broken. Do not place the monitor face down. • The CDT surface may be damaged. Do not use the monitor without the monitor stand. • It could break down or cause a fire due to bad ventilation. • If the monitor must be used without the supplied stand, take steps to insure proper ventilation. When cleaning the monitor case or the surface of the CDT, wipe with a slightly moistened, soft fabric. Do not clean Flat monitor with water. Use a water-diluted mild detergent. (Some detergents contain significant amounts of alcohol-based solvents, which can damage (color change) or crack the monitor case. The antiglare/anti-static surface coating on the CDT may also be affected.) Dilute the detergent (1:10 ratio) with water before using. When cleaning the monitor case or the surface of the CDT, wipe with a slightly moistened, soft fabric. Do not clean Flat monitor with water. Use a water-diluted mild detergent. (Some detergents contain significant amounts of alcohol-based solvents, which can damage (color change) or crack the monitor case. The antiglare/anti-static surface coating on the CDT may also be affected.) Dilute the detergent (1:10 ratio) with water before using. Notational Power Installation Clean Others Do not water or spray detergent directly on the monitor. Use the recommended detergent with a smooth cloth. • You can prevent the coated CDT from being damaged or the monitor cabinet from being dissolved, cracked or discolored. • You can buy a recommended detergent at any Samsung Service Center. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. • A dirty connector can cause an electric shock or fire. Do not set a glass of water, chemicals or any small metal objects on the monitor. • This may cause damage, electric shock or a fire. • If a foreign substance gets into the monitor, disconnect the plug and then contact a service center. Notational Power Installation Clean Others Do not remove cover(or back). • This may cause an electric shock or fire. • Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. • This may cause an electric shock or fire. Do not place any heavy objects on the monitor. • This may cause an electric shock or fire. For each hour of looking at the monitor, you should let your eyes rest for 5 minutes. • This will reduce eye fatigue. Do not use or store inflammable substances near the monitor. • This may cause an explosion or fire. Do not try to move the monitor by pulling on the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or thesignal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. Keep the monitor away from any magnetic substances. • This may cause discoloring or distortion of the image. SyncMster 591S / 793S / 591V / 793V / 793DF / 795DF / 797DF / 997DF / 793MB / 795MB Monitor and Stand Power Cord Unpacking Front Rear Bottom (Some mo...
Dieses Handbuch ist für folgende Modelle:Monitore - 591V (5.52 mb)
Monitore - 793DF (5.52 mb)
Monitore - 793MB (5.52 mb)
Monitore - 793S (5.52 mb)