Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Do not install the product on an unstable, uneven surface or a locationprone to vibrations. • Dropping the product may cause damage to the product or the person carrying it. • Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor. • Failure to disconnect cables may damage it and cause fire or an electric shock. Make sure there are more than two people when moving the product. • Dropping the product may cause a malfunction or injury to the person carrying it. Place the product out of children's reach, as they could damage byhanging onto it. • A falling product may cause injury to the person or even fatality. When not using the product for an extended period of time, keep theproduct unplugged. • Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. • Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even fatality. When lifting up or moving the monitor, do not lift the monitor upsidedown while holding only the stand. • This may cause your monitor to fall, and become damaged or cause personal injury. Good Postures When Using the Monitor Try to maintain a good posture when using the monitor. • Keep your back straight. • Keep a distance of about 45 ~ 50 cm between your eyes and the monitor screen. Look at the screen from slightly above it, and have the monitor directly in front of you. • Tilt the monitor upwards by 10 ~20 degrees. Adjust the monitor height so that the top of the monitor is slightly below eye level. • Adjust the monitor angle so that there is no reflected light on the screen.Try to maintain your arms perpendicular to your armpits. • Keep your arms level with the back of your hands. • Keep the angle of the elbow perpendicular. • Keep the angle of the knees at more than 90 degree. Do not let your feet fall up from the floor. Adjust the arm position so that it is below the heart. Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Manual Warranty CardQuick Setup Guide (Not available in all User's Guidelocations) Cable DVI-D (Dual link) Cable Power Cord Sold separately USB Cable (A-B Type cable) Front 2. Power button []Turns the monitor on/off. 1. Brightness button [] Push the button to adjust brightness. Ў : The screen is getting dark. ^ : The screen is getting bright. / Power indicator / The blue light is on in its normal working condition and blinks when setting the adjustments of the monitor. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor off when it is not needed, or when leaving it unattended for long periods. Rear (The configuration at the back of the monitor may vary from product to product.) 1. DOWN : Connect the DOWN port of the USB monitor and a USB device with the USB cable. • To use DOWN, you have to connect the UP to the PC. • Make sure to use the USB cable supplied with this monitor to connect the monitor's UP portand your computer's USB port. 2. UP : Connect the UP port of the monitor and the USB port of the computer with the USB cable. DVI IN Connect the DVI-D (Dual link) Cable to the DVI IN port on the back of your monitor. • By using DVI-D (Dual link), you can expect twice faster speed and improved signal quality than those of DVI-D (single link). • It is strongly recommended using DVI-D (Dual link) Cable for the best quality and speed. 1. ON [ | ] / OFF [O] Switch the monitor on and off. 2. POWER Connect the power cord for your monitor to the POWER port on the back of the monitor. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. Stand Stopper Remove the fixing pin on the stand to lift the monitor up and down. See Connecting the Monitor for further information regarding cable connections. Connecting the Monitor 1. Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Using the DVI (Digital) connector on the video card. Connect the DVI-D (Dual link) Cable to the DVI IN Port on the back of your Monitor. [ DVI IN] Turn on your computer and monitor. If your monitor displays an image, installation is completed. Connecting USB You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by connectin...