Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
8. Click the "Have Disk" button 9. Specify A:\(D:\driver) then click "OK" button. 10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK". 11. Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box. (You can get some other screen for warning message or others, then click the appreciate option for your monitor.) Microsoft® Windows® NT Operating System 1. Click Start, Settings, Control Panel, and then double-click Display icon. 2. In Display Registration Information window, click Settings Tab and then click All DisplayModes. 3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click OK. 4. Click Apply button if you see the screen working normally after clicking Test. If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency). Note: If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Display Modes in the user guide. Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of system setting file. 1. Press Enter at the first and the second screen after executing the X86Config file. 2. The third screen is for setting your mouse. 3. Set a mouse for your computer. 4. The next screen is for selecting a keyboard. 5. Set a Keyboard for your computer. 6. The next screen is for setting your monitor. 7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 8. Set a vertical frequency for your monitor. (You can enter the frequency directly.) 9. Enter the model name of your monitor. This information will not affect the actual execution of X-Window. 10. You have finished setting up your monitor. Execute X-Window after setting other requested hardware. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with the four screws that came with the arm-type base, wall mount hanger or other base. Removing the base Removing the base Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting 1.Turn off your monitor and unplug its power cord. 2.Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3.Remove the two screws and then remove the Stand from the LCD monitor. Attaching a base NOTE: This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad. 1. Rear cover mounting pad 2. Mounting interface pad Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with the four screws that came with the arm-type base, wall mount hanger or other base. SyncMaster 173T/193T/191T plus/153T (Square) (Square) SyncMaster 170N/171N/172N/173N/ 191N/192N/193N/150N/151N/152N (Square) Brightness Menu How to adjust Contrast Menu Brightness -Adjust Brightness. 1. Push the Menu button. 2. Push the Menu button to open the Brightness adjustment screen. 3. Use the [ + ] button to increase the brightness or [ -] button to decrease the brightness. Direct Access Feature : When OSD is not on the screen, Push the [ + ] or [ -] button to adjust brightness. How to adjust Contrast -Adjust Contrast. 1. Push the Menu button. 2. Push the [ -] button or [ + ] button until the Contrast screen is displayed. 3. Push the Menu button to open the Contrast adjustment screen. 4. Use the [ + ] button to increase the contrast or [ -] button to decrease the contrast. Image Lock Menu How to adjust Image Lock [Fine] - Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 1. Push the Menu button. 2. Push the [ -] button or [ + ] button until the Image Lock screen is displayed. 3. Push the Menu button twice to open the Fine adjustment screen. 4. Use the [ -] button or [ + ] button to remove any noise. Menu How to adjust Image Lock [Coarse] - Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 1. Push the Menu button. 2. Push the [ -] button or [ + ] button until the Image Lock screen is displayed. 3. Push the Menu button again and then press the [ -] or [ + ] button until the Coarse screen appears. 4. Push the Menu button to open the Coarse adjustment screen. 5. Use the [ -] button or [ + ] button to remove any noise. H-Position H-Position Menu How to adjust V-Position Menu H-Position - Follow these instructions to change the horizontal position of the monitor's entire display. 1. Push the Menu button. 2. Push the [ -] button or [ + ] button until the H-Position screen is display...
Dieses Handbuch ist für folgende Modelle:Monitore - 150N (3.76 mb)
Monitore - 151N (3.76 mb)
Monitore - 170N (3.76 mb)