Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
PROTECT TURBO GEBRAUCHSANWEISUNG - DAMPFGENERATOR NOTICE D’EMPLOI - GENERATEUR DE VAPEUR GEBRUIKSAANWIJZING - STOOMGENERATOR INSTRUCTIONS FOR USE - STEAM GENERATOR ISTRUZIONI PER L’USO - GENERATORE DI VAPORE 016686 - 03/05 English 1- UNDERSTANDING YOUR STEAM GENERATOR Steam control button (depending on the model) Temperature control slide for the iron Removable water tank Removable water tank filler cover Iron rest Carrying handle Boiler rinse plug and steam Iron-base steam cord Power cord storage space Thermostat light Steam generator boiler (in the base unit) Handles for removing and replacing the water tank Illuminated on / off switch 2-part protective hood Turbo steam button Power cord reel button cord fastener clip (depending on the model) Control panel Steam output control dial Orange “boiler rinse” light Red “removable water tank empty” light “Reset” button (To be activated after rinsing the boiler) Green “steam ready” light 2- “PROTECT CONCEPT”™ SAFETY SYSTEM 2- “PROTECT CONCEPT”™ SAFETY SYSTEM Your generator is equipped with the “Protect Concept” system. • Double protective flaps. • Flap locking system engages automatically when flaps are closed over the iron, opened by pressing release button. • Automatic heat shut-off when flaps are closed. • Carrying handle. IRONING POSITION The appliance heats (if connected) PROTECT CONCEPT Automatic “Security Auto-stop” function which shuts off the heating of the appliance when the hood is closed over the iron 2 part protective hood Carrying handle Release button for 2-part retractable protective hood Your steam generator is equipped with an automatic “Security Auto-stop” function which cuts off the heating of the appliance when the flaps are closed over the iron.The control panel lights go out and the on indicator remains lit, showing that the appliance is connected but not heating. 3- PREPARING YOUR STEAM GENERATOR 1.To carry your steam generator: - place the iron on the iron rest of the generator and raise the hood over the iron until it locks into place (audible click) (1). - grasp the handle of the protective hood to carry your steam generator (2). 2. Place your steam generator on a stable, horizontal heat-resistant surface. 3. Grasp the handles of the removable tank and pull horizontally to remove it (3). 4. Fill up the water tank taking care not to exceed the maximum level just below the filler cover (4). 5. Replace it firmly in its housing, making sure it is fully into place (5). CLICK1 2345 Your steam generator has been designed to operate using untreated tap water. However, if your water is very hard, mix it 50% untreated tap water with 50% distilled water. Do not add anything to the contents of the removable water tank, and do not use water from clothes dryers, scented water, water from refrigerators, water from air conditioners or rain water. Also do not use filtered, boiled or bottled mineral water. These contain organic waste or mineral elements that become concentrated when heated and cause spitting, brown staining or premature wear to your iron. 4- USING YOUR STEAM GENERATOR The water to use in your steam generator : Types of water to be avoided : 1. Press the release button for the 2-part protective hood and fold it down over the tank to release the iron (6). 2. Completely unwind the power cord from its storage space before connecting to an earthed socket (7). 3. Press on the on / off switch (located on the side of the base unit) (a): the green light (located on the control panel) flashes and the boiler heats up (b).It will take around 2 minutes for steam to be produced which is indicated when the green “steam ready” light stops flashing (8) . 6 7(a) (b) 8 • The first time the appliance is used, there may be some fumes and smell but this is not harmful. They will not affect use and will disappear rapidly. • When starting, and regularly while it is being used, your steam generator's electric pump injects water into the boiler. It makes a noise but this is quite normal.You may also hear a clicking noise which is the steam valve opening.Again this is normal. If you are pressing on the steam control button at this time you may lose a little steam pressure momentarily. Recommendations: • To prime the steam circuit, either before using the iron for the first time, or if you have not used the steam function for a few minutes, press the steam control button several times in a row, holding the iron away from your clothes. This will enable any cold water to be removed from the steam circuit Iron temperature control slide setting: • Start with the fabrics to be ironed at a low temperature (.) and finish with those which need higher temperatures (... or Max). - Mixed fibre fabrics: set the ironing temperature to the setting for the most delicate fabric. - Woollen garments: press repeatedly on the steam control button to obtain short bursts of steam, without placing the iron on the garment itself.This will avoid making the fabric shiny. Steam output contro...
Dieses Handbuch ist für folgende Modelle:Bügeleisen - PROTECT TURBO (479.57 kb)