Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
This button is disabled for products that do not support MagicInfo. MagicInfo can only be enabled when a network box is connected. Enter the password in the OSD menu. Power off the product. Number buttons Return to the previous channel. Not available. Not available. Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu. You can select the PC, DVI, HDMIor DisplayPort external input directly. Not available. Not available. Turns the 3D image on or off. Use these buttons in Videos, Photos, Music and Anynet+ modes. 281 Preparations 1 1 Preparations Adjusting the OSD with the Remote Control MENU1.Openthe OSD menu. 2. SelectfromPicture, Sound, Media, Network, System orSupportin the displayed OSD menuscreen. 3. Change settings as desired. 4. Finish setting. EXIT5.Close the onscreen display (OSD) menu. To place batteries in the remote control 291 Preparations 1 1 Preparations Remote Control Reception Range 7m ~ 10m Use the remote control within 7m to 10m fromthe sensor onthe product at an angle of 30 from the leftand right. .Store used batteries out of reach of children and recycle. .Do not use a new and used battery together. Replace both batteries at thesame time. .Remove batteries when the remote control is not to be used for an extended period of time. 301 Preparations 1 1 Preparations 1.3Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with theinstallation instructions. .Ensure that an authorized installation company installs the wall mount. .Otherwise, it may fall and cause personal injury. .Make sure to install the specified wall mount. 1.3.1Tilting Angle and Rotation Contact Samsung Customer Service Center for further details. 15 AThe productcan be tilted ata maximumangle of 15 from a perpendicular wall surface. BTo usethe product vertically (portrait), turn itclockwise so that theLEDis pointingdown. 311 Preparations 1 1 Preparations 1.3.2Ventilation 1. Installation on a Perpendicular Wall AMinimum 40mm AB BAmbient temperature: Under35C .When installing the product on a perpendicularwall, allow at least 40mm of space between the product and wall surface for ventilation and ensure that the ambienttemperature is kept below 35C. Figure1.1 Side view 321 Preparations 1 1 2. Installation on an Indented Wall Contact Samsung Customer Service Center for further details. Figure 1.2 Side viewPlane viewAMinimum 40 mmBMinimum 70 mmCMinimum 50 mmDMinimum 50 mmEAmbient temperature: Under 35CABCEDD When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35C. 3. Installation in an Indented Floor Contact Samsung Customer Service Center for further details. AMinimum 50mmBAmbient temperature:Under 20CAB Figure1.3 Side view When installing the product in an indented floor, allowat least 50mm of space between the product and floor surface for ventilation and ensure thatthe ambient temperature is kept below 20C. 331 Preparations 1 1 Preparations 1.3.3Dimensions 51234 (Unit: mm) Model nameSET - Dimension (W x Dx H) [mm] Without STAND12345ME40A / DE40A920.0885.6498.2534.529.9ME46A / DE46A1055.21018.0572.6610.829.9 ME55A / DE55A1246.4 1209.6680.4718.229.9 UE46A1030.4 1020.1574.6585.029.9 UE55A1221.8 1211.6682.4692.729.9 All drawings are not necessarily to scale. Some dimensionsare subject to changewithout prior notice. Refer to the dimensions prior to performing installation of your product. Not responsible fortypographical or printed errors. 341 Preparations 1 1 1.4Installing the Wall Mount 1.4.1Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring. 1 1.4.2Installing the Wall Mount Kit The wall mount kit (sold separately) allowsyou to mount the product on thewall. For detailed information on installing the wall mount, see the instructions provided with the wallmount. We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage tothe product or injury to yourself or others if you elect to install the wall mount on your own. 1.4.3Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a ceiling or slanted wall, it may fall and result in severe personal injury. 351 Preparations 1 1 Preparations .Standard dimensions for wall mount kits are shown in the table below. .Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. .Do not use screws that do not comply with the VESA standard screw sp...
Dieses Handbuch ist für folgende Modelle:Monitore - DE40A (8.22 mb)
Monitore - DE55A (8.22 mb)
Monitore - ME40A (8.22 mb)
Monitore - ME46A (8.22 mb)