Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To resolve this, run the program again and set Remote Control to Enable. This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 andID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 When the All+Select checkbox is checked and all displays are selected: The default settings are displayed. Adjusting the LCD Display Input Available Modes □ PC / DVI / DisplayPort □ AV E Component □ HDMI □ MagicInfo □ TV Note A TV tuner box (sold separately) must be connected to use the TV. (US Only) MagicInfo can only be enabled when a network box(sold separately) is connected. Source List PACHMT I PC_ DVI AV Component HDMI1 HDMI2 DisplayPort Use to select PC, HDMI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. Component 5. HDMI1 - This is deactivated when a TV tuner box is installed. 6. HDMI2 - This is deactivated when a network box is installed. 7. DisplayPort 8. MagicInfo - Activated when a network box is connected. 9. TV - Activated when a TV tuner box is connected. (S Note The RGB/COMPONENT IN port is compatible with RGB (PC) and Component signals. Adjusting the LCD Display However, the picture may display abnormally if the connected external input signal is different from the selected video signal. PIP E 13 IS Note The PIP function is not available when Video Wall is On. When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off / On) © Note • PIP turns off when the LCD Display is switched to an external source. * If you select i, ■■], K in Size, Position and Transparency will not be activated. PIP PIP -1 £ Source Size ■ Position l~3 □ m\ UK Transparency Turns the PIP Screen Off/On. • Off • On Source PIP £ Source DVI Size AV /IN Position HDMI1 Transparency HDMI2 t DisplayPort a c" I Note PIP is disabled if the primary screen does not receive a signal. A TV tuner box (sold separately) must be connected to use the TV. (US Only) Selects the input source for the PIP. • PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort • DVI : PC • AV:PC Adjusting the LCD Display HDMI : PC DisplayPort : PC Size Changes the Size of the PIP window. IS Note Picture > Size will be changed to 16:9 when PIP is On. Position Changes the Position of the PIP window. Transparency PIP Source Size Position Transparency Adjusts the Transparency of PIP windows. • High • Medium • Low • Opaque Adjusting the LCD Display PC -- ► 1 £ DVI AV Component HDMI1 HDMI2 DisplayPort ► « * Edit Name PACH Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game /Camcorder / DVD Combo / DHR / PC / DVI PC / DVI Devices Note • The displayed devices differ depending on the external input mode. • When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV. However, since 640x480, 720p (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal. • The Picture menu changes depending on the input signal and Edit Name. When using a DVI to HDMI cable connection (which does not support audio and video at the same time), the audio port should be connected via a separate audio cable. • When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from the connected PC. • When an AV device is connected, set Edit Name to DVI Device to enjoy the video and audio from the connected AV device. Source AutoSwitch Settings PACHMT Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. IS Note • If the display TV source is active (TV tuner connected to the display) the Source AutoSwitch search function becomes inactive. The display will remain in the TV source. • Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection is set to On, the PIP function will not work, the Source AutoSwitch selection must be set to Off, for the PIP feature to work. • When the Source AutoSwitch selection is On, and or the Primary Source Recovery is On, the display power saving mode becomes inactive. • When Primary Source Recovery is On, only the Primary Source and Secondary Source selec...