Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Cornea Systems Dateigröße: 1.37 mb Dateiname: Unterrichtssprache:

f. Click on the “Display the list of all the drivers in specific location…” selection, then click on the “Have Disk”, and then, click on the “Browse File” button. g. Select “CD disk drivers”, for example select from the F-drive, the “INF file” folder. h. Click on the INF file (LCD.inf) on the Installation Disk and select proper size of this Monitor. • The size of this Monitor is stated on page 17 of this Manual. i. When the driver files are installed to the hard drive, click “OK” and press “Close” to save settings. j. Click “Yes” when prompted to accept the new “Refresh Rate” setting. To Change the Resolution or Refresh Rate: a. At the Windows 95/98/2000 desktop (initial screen), click the right mouse button to open a “pop-up” menu. b. With the left mouse button, click on “Properties” to open the “Display Properties” menu. c. Click on the “Setting” tab and change the resolution you what you want. d. Click “Apply” or “OK” button, then click “OK” to keep the selected resolution. e. Go back to “Display Properties” menu and click on the “Setting” tab. Select the “Advanced Properties” button and then click on “Adapter”. f. In “Adapter Properties”, select “Refresh Rate” to change it. •Our Monitors support a refresh rate up to 75Hz. For the best possible display, we recommenda refreshrate of 60Hz. • If you do not have this option, try the procedure again after installing the Monitor driver. CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode CT1503 Main Menu: CT1702 Main Menu: CT1503 Vertical Position Sub-Menu: CT1702 Position Sub-menu: CT1503 Horizontal Position Display: instead. •Remember to press the SELECT button when the display is centered horizontally. CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode CT1503 Main Menu: CT1702 Main Menu: CT1503 Brightness Sub-Menu: CT1702 Brightness Sub-Menu: CT1503 Contrast Sub-Menu: CT1702 Contrast Sub-Menu: Explanation of Remaining Menu Items: PC (ANALOG) Mode Explanation of Remaining Menu Items: PC (ANALOG) Mode The following table describes the other menus available. Figure 9: The Main Menus for the CT1503 and the CT1702, respectively: CLOCK •Performs a rough image tuning by screen size adjustment. •CT1702: The CLOCK sub-menu is obtained via the POSITION item on the Main Menu. CT1503 Clock Sub-Menu: CT1702 Clock Sub-Menu: Explanation of Remaining Menu Items: PC (ANALOG) Mode Explanation of Remaining Menu Items: PC (ANALOG) Mode COLOR •Fine-tunes the image viewing. Preset 1 •Bluish White Preset 2 CT1503 User Color Sub-Menu: •Plain White User Color (CT1503 only) •Controls the individual colors of Red, Green, and Blue. Exit (CT1702 only) •Closes this sub-menu and CT1702 Color Sub-Menu: returns to the Main Menu. CT1702 User Color Sub-Menu: Explanation of Remaining Menu Items: PC (ANALOG) Mode Explanation of Remaining Menu Items: PC (ANALOG) Mode CT1503: SELECT INPUT (CT1503)/ SETUP (CT1702) •Displays current Input Signal. •Allows change of the Input Signal to the other options. CT1503/CT1702: EXIT MENU •Closes the Main Menu. CONFIGURING & ADJUSTING the Display: TV/CATV (TUNER) Mode CONFIGURING & ADJUSTING the Display: TV/CATV (TUNER) Mode Using the system’s On Screen Displays (OSD), you can adjust and refine your Monitor’s image. The following table describes the initial set-up steps and the other menus available. Remember, whenusingthe buttons onthe frontofyour Monitor: • Press the MENU button to display the Main Menu. • Use the CHANNEL ^ Ў buttons to scroll through the menu items. • Press the SELECT button to choose the desired menu item and to store the new value/parameter. • Use the VOLUME buttons to increase/decrease the value/parameter. Initial Set-Up & Adjustment of the Monitor Select the Input Source Mode 1. After all the connections are made, turn ON the Monitor and other devices, as appropriate. 2. Select the Input Source mode by using either the Remote Control: •Pressing (repeatedly) the SOURCE button OR The buttons on the front of the Monitor by: •Pressing the SELECT button (repeatedly) to scroll through the various Input Source modes OR •From the Main Menu, choose the SELECT INPUT (CT1503)/ SETUP option (CT1702). 3. Select the TUNER mode. CT1503 Input Source Scroll Sequence: CT1702 Input Source Scroll Sequence: Digital S-Video Tuner Analog Digital Composite S-Video Tuner Analog CONFIGURING & ADJUSTING the Display: TV/CATV (TUNER) Mode CONFIGURING & ADJUSTING the Display: TV/CATV (TUNER) Mode Select the Proper Antenna: AIR or CATV 5. At the initial display, select the antenna appropriate for your system by: •Pressing the MENU button to display the Main Menu. •Pressing the CHANNEL ^ Ў buttons (repeatedly) to scroll to the CHANNEL option. • Press the SELECT button to select the item. CT1503 Main Menu: CT1702 Main Menu: 6. At the CHANNEL sub-menu...

Herunterladen

Geben Sie zwei Ziffern: