Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
3. Press the Shuttle Knob again to open the function’s window. 4. Rotate the Shuttle Knob to change the settings of the function. 5. To save and exit, select the exit function or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2-4. Note: When the OSD window is open, the input signal timing settings appear at the top. H: stands for horizontal frequency and V: stands for vertical frequency. AOC 7F-SLK v2_123102 9 Operating Instructions AOC 7F-SLK Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B. The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information. The DDC2B is a bidirectional data channel based on the I.C protocol. The host can request EDID information over the DDC2B. Windows INF Driver File Most computers will automatically configure your monitor to work with your computer. For optimal viewing of your monitor, download the AOC monitor driver. Follow these steps: 1. Go to 2. Click on SUPPORT to open the drivers web page. 3. Follow the directions on the web page to download and install the driver on your computer. Or go to to directly access the driver web page. AOC 7F-SLK 10 v2_123102 Technical Support (FAQ) AOC 7F-SLK Problem Possible Solution Power LED is not ON • Make sure the power cord is properly connected to a grounded power outlet and to the monitor. No Plug & Play • Confirm that your computer is Plug & Play compatible. • Confirm that your video card is Plug & Play compatible. • Inspect the video cable and make sure that none of the pins are bent. • Make sure the AOC monitor drivers are installed (AOC monitor drivers are available at: Picture is fuzzy • Adjust the Contrast and Brightness settings. Picture bounces or a wave pattern is present in the picture • Move electrical devices away from the monitor. They may be causing electrical interference. Power LED is ON • Press a key on the keyboard or wiggle the mouse to re-activate the monitor. (green or orange light • Make sure the video cable is properly connected to the computer. is ON) but there is no • Inspect the video cable and make sure none of the pins are bent. video or picture. • Make sure your computer is operating correctly by pressing the CAPS LOCKkey and observing whether the CAPS LOCK light turns ON or OFF. Missing one of the primary colors (RED, GREEN, or BLUE) • Inspect the video cable and make sure that none of the pins are bent. • Make sure the video cable is properly connected to the computer. Screen image is not centered or sized properly • Adjust the Horizontal, Vertical or Zoom settings in the OSD window. Picture has color defects (white doesn’t look white) • Adjust the User Color setting in the OSD window. AOC 7F-SLK 11 v2_123102 Appendix AOC 7F-SLK Specifications CRT Size 17.0" (43.2 cm) 11.4” (29 mm) neck 0.25mm(D), 0.21mm(H) dot pitch 90 degree deflection Viewable image size 16.0” (40.6 cm) diagonal Preset Display area 11.8” (300 mm) X 9.1” (230 mm) Dot Clock 110 MHz Maximum Resolution 1280 x 1024 pixels Plug & Play VESA DDC1/2B TM Input Video Red, Green, Blue Analog Interface Separate Sync. H/V TTL H/V Sync. Positive/Negative H-Frequency 30 kHz - 72 kHz V-Frequency 50 Hz -130 Hz Input Video Signal Analog: 0.7 Vpp, 75 OHM, Positive Power Source Universal AC 100 - 240 V 50/60 Hz Factory Preset Mode 6 User Programmable Mode 10 EPA ENERGY STAR® Yes Power Consumption (Maximum) 90 Watts Regulatory Compliance UL, CSA, FDA, FCC, TUV/GS, MPRII AOC 7F-SLK 12 v2_123102 Appendix AOC 7F-SLK Specifications (continued) Environmental Operating Temp: Considerations 32° to 104°F (0° to 40°C) ambient Operating Humidity: 10% to 85% relative, non-condensing Signal Cable Attached Mini D-sub 15 Male Optimal Viewing Mode: 1024 x 768 x 85 Hz AOC 7F-SLK 13 v2_123102 Appendix AOC 7F-SLK Factory Preset Timing Table Standard Resolution (in pixels) Horizontal Frequency Vertical Frequency VGA 720 . 400 31.5 KHz 70 Hz 640 . 480 31.5 KHz 60 Hz VESA / 85 640 . 480 43.3 KHz 85 Hz 800 . 600 53.7 KHz 85 Hz 1024 . 768 68.7 KHz 85 Hz VESA / 60 1280 . 1024 64.0 KHz 60 Hz AOC 7F-SLK 14 v2_123102 Appendix AOC 7F-SLK Connector Pin Assignment Pin Number Description Pin Number Description 1 Red 9 NC 2 Green 10 Ground 3 Blue 11 Monitor Ground 4 Ground 12 DDC-Serial Data 5 Ground 13 H-Sync 6 R-Ground 14 V-Sync / *V-Clk 7 G-Ground 15 DDC-Serial Clock 8 B-Ground * For DDC AOC 7F-SLK 15 v2_123102 Limited 3-Year Warranty AOC 7F-SLK This is a warranty statement for AOC color monitors including those sold within North America as specified. Envision Peripherals, Inc. (EPI) warrants this pro...
Dieses Handbuch ist für folgende Modelle:Monitore - AOC 7F-SLK (448.75 kb)