S’il vous plait fournir l’information suivante: - Numero du Modele - Numero de Serie (si present) - Description de la Piece et son numero sur la liste Sirvase darnos la siguiente informacion: - Numero del Modelo - Numero de serie (de haberlo) - Descripcion y numero del repuesto segun la lista 47 48 49 12 11 10 13 27 14 51 1 3 4 46 33 35 40 41 39 54 29 28 2 15 20 19 16 18 5 8 6 9 37 7 38 32 30 45 22 38 16 17 21 25 55 50 26 36 38 53 23 44 43 42 31 52 34 24 Ref. No. Part Number Qty. No de Ref. Nume

Part No. D26052-023-0 BEFORE ASSEMBLY 1. Shut off the pressure washer and turn off the water supply. 2. Pull trigger on gun handle to relieve any water pressure. 3. Disconnect the high pressure hose from the gun. TO ASSEMBLE HOSE REEL 1. Attach handle to flange assembly. NOTE: Screws must be inserted from the inside of hose reel and secured with nuts on the outside as shown. Tighten securely. 2. Remove quick connect plug from high pressure hose. 5. Apply sealant tape to swivel end of high pressu

To learn more about Porter-Cable visit our website at: PCA390 Copyright © 2002 Porter-Cable Corporation The Model and Serial No. plate is located on the frame. Record these numbers in the spaces below and retain for future reference. Model No. Type Serial No. Part No. D26052-023-0 BEFORE ASSEMBLY 1. Shut off the pressure washer and turn off the water supply. 2. Pull trigger on gun handle to relieve any water pressure. 3. Disconnect the high pressure hose from the gun. TO ASSEMBLE HOSE REEL 1. At

for Pro-Series Pressure Washers Replacement Parts List For Replacement Parts, Call 1-800-330-0712 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown in parts list Address parts correspondence to: The Campbell Group Attn: Parts Department 100 Production Drive Harrison, OH 45030 Ref. No. Description Part No. for Models: PW2212 PW2020 PW2220 PW2619, PW3018 PW3019,PW3020 PW3021 PW3221 PW3521 Qty. 1 Base plate PM038200AV PM0

It is the ideal method for stripping, polishing and etching projects. This equipment can be used with abrasive powders and liquids. This model is equipped with the standard use ceramic nozzle. Description L’equipement de decapage Maxus est concu pour nettoyer et enlever la rouille, les ecailles, la peinture, la crasse et la salete. C’est la methode ideale pour le degarnissage, le polissage et le decapage. Cet equipement peut etre utilise avec le sable, les poudres abrasives, l’eau et autres liqu

1 20 22 21 20 19 18 17 16 15 14 13a & 13b 12 11 10 9 8 7 6 5 4 3 2 4 4 7 7 23 22 21 21 18 21 24 25 25 26 2 Model MXS21002 and MXS21003 Assembly Tools needed for Assembly: 1. Two 8 inch crescent wrenches 2. Phillips head screwdriver 3. Flat head screwdriver 4. Needle nose pliers 5. 14 mm wrench 6. Rubber mallet Check package to make sure nothing is missing. To assemble correctly, use the following instructions: 1. Turn the tank (3) up side down. 2. Attach the axle brackets (20) to the tank using

4. After oil is drained replace oil drain plug. Tighten securely. 5. Remove oil fill cap and fill with recommended oil. See the Pump Oil Chart for the correct amount and type of oil. 6. Replace oil fill cap and tighten securely. PUMP OIL CHART Oil Fill Plug Oil Drain Plug PUMP TYPE OIL TYPE OIL CAPACITY DAPC (axial cam) * R&O 150 8 oz. * If unable to find use 30 W non detergent 13- ENG D25803 WAND If the nozzle becomes clogged with foreign materials, such as dirt, excessive pressure may develop.

ESPANOL: PAGINA 21 FRANCAIS: PAGE 41 To learn more about Porter-Cable visit our website at: PCH2401 Copyright © 2002 Porter-Cable Corporation The Model and Serial No. plate is located on the frame. Record these numbers in the spaces below and retain for future reference. Model No. Type Serial No. 5 Horsepower 2400PSI 2.5 GPM Pressure Washer Part No. D25803-025-1 GENERAL INFORMATION . Congratulations! You have purchased a high quality product from America’s leading manufacturer of pressure washer

Engine exhaust contains carbon monoxide, an odorless and deadly gas. DO NOT let hoses come in contact with very hot engine muffler during or immediately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty. Never pull water supply hose to move pressure washer. This could damage hose and/or pump inlet. DO NOT use hot water, use cold water only. Never turn water supply off while pressure washer engine is running or damage to pump

Stay alert at all times. • Never defeat the safety features of this product. • Do not operate machine with missing, broken, or unauthorized parts. • Never leave wand unattended while unit is running. • If engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure. Pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury. • Keep children away from the pressure washer at all times. • Do not overreach or s