Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• pump housing and/or other parts broken. • water seal worn out. • change parts. • Change water seal. unstable pressure • Nozzle being clogged. • Pump sucking air. • Valves dirty, worn out or stuck. • check the nozzles. • Check that connections are airtight. • Clean or replace. When you turn the switch ON, the engine buzzes, but it does not start. • Using an extension cord over 40 feet. • Sealing worn out. • Do NOT use extension cords over 40 feet. • Check and replace. • Pump is stuck due to dirt, mineral build up, or ice. • Unplug unit. If temperature is below freezing do not use. Thaw in a warm area. • Net voltage is lower than the minimum suggested voltage. • Check the electric installation is suitable. 17 18 ...
Dieses Handbuch ist für folgende Modelle:Hochdruckreiniger - 966000201 (1.19 mb)