Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
+ Multi-function Button ON/OFF Switch Using the Controls on the CERULEAN F1 Page 6 Using the Controls on the CERULEAN F1 Continued Page 7 Remote Control Functions (AVRCP) To: Do this: Remote Functions Play/Pause Press the Multi-function button once for each command Press / Release Stop playing Press and Hold Multi-function button until music stops Press / Hold / Release Skip to next track Press the Next Track button Press / Release Skip to previous track Press the Previous. Track button Press / Release Control volume The F1’s volume controls affect only the F1 and does not remotely control the volume of a connected device. Control volume Up/Down Press either the “+” or “-” on the Volume Control button Press / Release Multi-function Button Next/Previous Track Button Volume up/down The above functions require an iPod equipped with the CERULEAN TX Bluetooth transmitter or a device with AVRCP Bluetooth support (See your device’s manual. Compatibility may vary). Switches and Controls Top Side (Right Earpiece) The RIGHT earpiece contains all Mini USB Port (Type A) Volume Controls Bottom Mic controls including the power switch. The LEFT earpiece contains the lithium battery. Multi-function Button Next/Previous Power Track ON/OFF The CERULEAN F1 is both a stereo Bluetooth® earphone and a mono headset. As a stereo earphone, you can connect to a stereo Bluetooth (A2DP) audio device or iPod® (equipped with the *CERULEAN TX) and listen to your audio wirelessly. As a mono headset, you can connect to a Bluetooth mobile phone, accept or reject calls and access other call features. The CERULEAN F1 uses standard Bluetooth 2.0 defined profiles making it capable of interacting with other Bluetooth devices. These profiles allow it to remotely control specific Power and Pairing Controls features of a device, act as wireless stereo earphones and also act as a wireless mono headset for a mobile phone. olstronHeadset Co this:Do:THeadset Controls Redial Last Number* Press and Hold the Multi-function button until beep Press / Hold / Release Activate Voice Dial* Press the Multi-function button Press / Release Answer Incoming Call Press the Multi-function button Press / Release Reject Incoming Call* Press and Hold the Multi-function button until beep on incoming call Press / Hold / Release Terminate Current Call Press the Multi-function button during call Press / Release Mute Mic ON/OFF Press either the Next or Previous Track button Press / Release Cancel outgoing call Press and Hold the Multi-function during outgoing call Press / Release Transfer call to/from phone* Press Multi-function button during call until beep Press / Hold / Release Call Waiting *(Answer second incoming call) Press and Hold the Next/Previous Track button during first call until beep Press / Hold / Release Toggle between Calls* Press and Hold the Next/Previous Track button during call until beep Press / Hold / Release Multi-function Button Next/Previous Track Button The above functions require a device with HFP and HSP Bluetooth support (refer to your device’s manual). *Dependent on mobile phone features. Supported Profiles. Front Status LED Light Enables the CERULEAN F1 to receive stereo audio wirelessly from any (A2DP) Bluetooth device. Enables the CERULEAN TX to transmit stereo audio wirelessly via Bluetooth. Enables the CERULEAN F1 to remotely control specific features of any (A2DP) Bluetooth device. Enables the CERULEAN TX to receive remote control commands via Bluetooth to control the iPod. Enables the CERULEAN F1 to act as a wireless mono headset for taking phone calls via a Bluetooth mobile phone. Enables the CERULEAN F1 to remotely make, answer or terminate a call on a Bluetooth mobile phone. CERULEAN F1 Specifications Page 8 General: Earphone Driver Unit: Bluetooth version 2.0, Class II Diameter <15mm Bluetooth Profile Support A2DP / AVRCP / HSP/ HFP Frequency Response 20Hz ~ 20KHz RF Frequency 2.4GHz / 79 Channel / AFH Sound Pressure Level 93dB @ 1KHz Operational Range Standard 33 feet (10 meters)* Impedance 16 @ 1V, 1KHz Talk Time (Headset ) max.10 hours* Power Rating 5mW (Max) Music Listening (Earphone) max. 8 hours* Other: Standby Time up to 300 hours Microphone Typical : ECM unit (110dB) Battery Charge Time 2.5 hours (Lithium-Polymer) S/N Ratio Up to 58dB Power / Charging Method (USB) 5V, 300mA / DC Dimensions 47mm x 25mm x 23.5mm (L) x (W) x (H) Weight 35g (approx.) *May vary depending on user habits. Troubleshooting If the Status LED on my CERULEAN F1 is not on or flashing. Check that the CERULEAN F1 is powered on. If the power is on but the LED light is off, then try charging the unit as described in this manual. If crackling noises and/or interruptions occur when listening to the CERULEAN F1. Bluetooth is a radio technology. It is sensitive to environmental conditions and objects that may interrupt the signal. Cordless phones, wireless internet routers or any device that operates on wireless frequency of 2.4GHz may cause some interference. To ...