Verify that the ignition wire is tightly connected at both ends and free of obvious signs of damage. Again, if damage is due to excessive heat in the equipment, that problem must also be corrected. Check for proper operation by disconnecting the wire from the ignitor, inserting the tip of a screw driver into the terminal, and holding it near the frame of the unit as the power switch is placed in the on position. A strong blue spark should be generated for at least 4 seconds. DANGER Make sure the

For a full-pot fryer, turn the computer on by pressing either switch. For split-pot fryers, press the left switch to operate the left pot and the right switch to operate the right pot. The KFC-1 SMS Cooking Computer is designed to control either single or NOTE: Activation of the oil management multiple cooking cycles. The computer has 10 product buttons, which can be system is optional. All individually programmed with up to 10 cooking intervals, three pre-alarms, and other features of the strai

The computer is easy to use. One button push starts a cook cycle for an item cooked in a dedicated vat. The same flexible computer on a multi-product vat requires only two button pushes to launch a cook cycle. Just choose a menu item on a product buttons and press, and then press a cook cycle button under the display showing the desired item. The computer can move seamlessly from McNuggets to Crispy Chicken to any added menu item. In a typical store setting, the M2000s on the three-vat fry stati

Lighted Display -- right display of various functions and operations. Program Lock and Temperature Check Switch -- locks program in computer and/or displays frypot temperature when depressed. (Oldstyle computers will have this switch: ) Power Switches— either switch turns power "ON" or "OFF". (Oldstyle computers will have this switch: ) Product and Coding Switches – provides access to computer and programming functions. (Old-style computers will have these switches: ) Programming Switch -- used