Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
9392-1071 Hub (1) Part No. 9392-2101 Pole Sleeves 1 Pole Assembly Hub clipped to fabric -You will need to assemble and connect one pole at a time to the hub. -Do not completely assemble poles. a) Beginning at spring-clip end of pole, assemble all but the last shock-corded section. The pole and one section should curve downward. (illus. 1) b) Locate the center top clip on the fabric and attach it to the Hub (illus. 1), (illus. 3) c) Starting at the corner, Insert the spring-clip end of the pole through the webbing loop and then into the pole sleeve pushing it toward the center (illus. 1) d) Insert the spring-clip end into one of the hub ports until it clicks into position. That pole will now partially stand up. (illus. 2), (illus. 3), (illus. 4) e) Repeat for each of the three remaining poles (illus. 3) Webbing Loop Poles inserted through webbing loop and pole sleeves Illus. 2 Poles inserted into hub Illus. 3 Poles clipped into position in the hub 2 Attach Shelter to Frame -When the poles are attached to the hub, and the shelter is partially standing, hook the webbing loop into position over the metal bracket.(illus. 4), (illus. 5) illus. 5 Metal bracket for webbing loop 3 Corner clips Complete Shelter -Fully extend each pole by straightening all shock-corded pole sections. -Insert the pin on the pin and ring system, at the corner of the SkyDome fabric into the the pole end. (illus. 6), (illus. 8) -Repeat for remaining poles. -Adjust poles to pull the shelter taut and stake down through the fabric loops at the end of pin and ring. (illus. 7), (illus. 8) -Attach corner clips to poles. -Attach guy lines to fabric guy loops at each corner and stake out. (illus. 8) -Doors can be secured open. illus. 4 Screen House clipped to partially assembled frame illus. В Completed shelter with guy lines staked out. illus. 6 Insert into the pole end illus. 7 Stake through stake loop Things You Should Know • Never store shelter, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your shelter. Use separate storage bag. • STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE SHELTER FABRIC OR STAKE LOOP TO REMOVE STAKE. • SHELTER POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING STORAGE. • Do not leave your shelter set-up for weeks at a time, be aware that exposure to the ultraviolet rays of the sun can seriously damage material and/or cause it to become discolored. WARNING: Keep all flame and heat sources away from this shelter fabric. This shelter meets the flammability requirements of CPAI-84. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the shelter fabric may render the flame-resistant properties ineffective. THE COLEMAN CO., INC. 3600 N. Hydraulic • Wichita, Kansas 67219 1-800-835-3278 • MADE IN SRI LANKA PRINTED IN SRI LANKA Rev. 11/04...