Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Failure to do so can result in serious injury. Save this manual. Copyright© 1997 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Manual Revised 10i SKU 03551 03552 For technical questions, please call 1-800-444-3353. Page 2 SPECIFICATIONS Save this manual You will need the manual for the safety warnings and cautions, assembly instructions, operating procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep both this manual and your invoice in a safe, dry place for future reference. Safety warning & cautions WARNING: When using electric tools, machines, or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. READ ALL INSTRUCTIONS BEFORE USING THIS TOOL! KEEP WORK AREA CLEAN.1. Cluttered areas invite injuries. OBSERVE WORK AREA CONDITIONS.2. Do not use machines or power tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Do not use electrically powered tools in the presence of flammable gases or liquids. KEEP CHILDREN AWAY.3. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. STORE IDLE EQUIPMENT.4. When not in use, tools must be locked up in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. DO NOT FORCE THE TOOL.5. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s capacities. USE THE RIGHT TOOL FOR THE JOB. 6. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended. DRESS PROPERLY.7. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. USE EYE AND EAR PROTECTION.8. Always wear ANSI approved chemical splash goggles when working with chemicals. Always wear ANSI approved impact safety goggles at other times. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. DO NOT ABUSE THE POWER CORD.9. Do not yank it to disconnect it from the receptacle. Do not carry tools by the cord. DO NOT OVERREACH.10. Keep proper footing and balance at all times. Do not reach over or across running machines. 3551 3552 Capacity 1/2 Ton 1 Ton Maximum Height 4-1/2” 5-1/2” Maximum Diameter 6-1/2” 8” Largest Arbor 1” 1-1/8” Ram Square 3/4” 1” Height of Press 10” 13” Base Dimensions 4” x 9-1/2” 5” x 11” Leverage Ratio 20:1 20: 1 MAINTAIN TOOLS WITH CARE.11. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. DISCONNECT POWER.12. Unplug when not in use, before servicing, and when changing accessories. REMOVE ADJUSTING KEYS AND 13. WRENCHES. Make it a habit to check that keys and adjusting wrenches are removed from the tool or machine work surface before plugging it in. AVOID UNINTENTIONAL STARTING.14. Be sure the switch is in the OFF position when not in use and before plugging in. Do not ...
Dieses Handbuch ist für folgende Modelle:Möbel - 3551 (662.45 kb)