Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
(Default Value) S3/STR Set ACPI sleep type is S3. • •••• USB KB Wakeup From S3-S5 Disabled Disabled USB KB Wakeup From S3-S5 function. (Default Value) Enabled Enabled USB KB Wakeup From S3-S5 function. • •••• Video Power Down Mode Disabled Disabled Video Power Down Mode Function. Suspend Set Video Power Down Mode to Suspend. Stand By Set Video Power Down Mode to Stand By. (Default Value) • •••• Hard Disk Power Down Mode Disabled Disabled Hard Disk Power Down Mode Function. Suspend Set Hard Disk Power Down Mode to Suspend. Stand By Set Hard Disk Power Down Mode to Stand By. (Default Value) 53 BIOS Setup 54 • Suspend Time Out (Minute.) Disabled Disabled Suspend Time Out Function. (Default Value) 1 Enabled Suspend Time Out after 1min. 2 Enabled Suspend Time Out after 2min. 4 Enabled Suspend Time Out after 4min. 8 Enabled Suspend Time Out after 8min. 10 Enabled Suspend Time Out after 10min. 20 Enabled Suspend Time Out after 20min. 30 Enabled Suspend Time Out after 30min. 40 Enabled Suspend Time Out after 40min. 50 Enabled Suspend Time Out after 50min. 60 Enabled Suspend Time Out after 60min. • Display Activity Ignore Ignore Display Activity. (Default Value) Monitor Monitor Display Activity. • IRQ 3~IRQ15 Ignore Ignore IRQ3 ~IRQ15. Monitor Monitor IRQ3~IRQ15. • Soft-off by Power Button Instant-off If the user press the power button once, he can turn off the system. (Default Value) Delay 4 sec The user needs to press the power button at least 4 sec, then he can turn off the system. • AC Back Function Memory When AC-power back to the system, the system will return to the state before AC-power off. Soft Off When AC-power back to the system, the system will be in “Soft-Off” state. (Default Value) Full On When AC-power back to the system, the system will be in ”Full-On” state. 6VM7-4I Motherboard 55 • Modem Use IRQ NA Set Modem Use IRQ to NA. 3 Set Modem Use IRQ to 3. 4 Set Modem Use IRQ to 4. (Default Value) 5 Set Modem Use IRQ to 5. 7 Set Modem Use IRQ to 7. • Modem Ring On / Wake On Lan Disabled Disabled Modem Ring On / Wake On Lan function. Enabled Enabled Modem Ring On / Wake On Lan function. (Default Value) • PME Event Wake up Disabled Disabled PME Event Wake up function. Enabled Enabled PME Event Wake up function. (Default Value) • RTC Alarm Power On You can set “RTC Alarm Power On” item to enabled and key in Data/time to power on system. Disabled Disable this function. (Default Value) Enabled Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. RTC Alarm Date : Every Day,1~31 RTC Alarm Hour: 0~23 RTC Alarm Minute : 0~59 RTC Alarm Second : 0~59 BIOS Setup PnP/PCI Configurations AMIBIOS SETUP –PNP/PCI CONFIGURATION SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Plug and Play Aware O/S :No Reset Configuration Data :No VGA Boot From :AGP PCI VGA Palette Snoop :Disabled DMA Channel 0 :PnP DMA Channel 1 :PnP DMA Channel 3 :PnP DMA Channel 5 :PnP DMA Channel 6 :PnP DMA Channel 7 :PnP IRQ 3 :PCI/PnP IRQ 4 :PCI/PnP IRQ 5 :PCI/PnP IRQ 7 :PCI/PnP IRQ 9 :PCI/PnP IRQ 10 :PCI/PnP IRQ 11 :PCI/PnP IRQ 14 :PCI/PnP IRQ 15 :PCI/PnP ESC : Quit ^v<>: Select Item F1 : Help PU/PD/+/-: Modify F5 : Old Values (Shift)F2 :Color F6 : Load BIOS Defaults F7 : Load Setup Defaults Figure 6: PnP/PCI Configuration • •••• Plug and Play Aware O/S Yes Enable Plug and Play Aware O/S function. No Disable Plug and Play Aware O/S function (Default Value) • •••• Reset Configuration Data Yes Reset configuration data. No Disabled this function. (Default Value) • •••• VGA Boot From AGP Set VGA Boot From AGP. (Default Value) PCI Set VGA Boot From PCI. • •••• PCI VGA Palette Snoop Enabled For having Video Card on ISA Bus and VGA Card on PCI Bus. Disabled For VGA Card only. (Default Value) 56 6VM7-4I Motherboard • •••• DMA Channel (0,1,3,5,6,7) PnP The resource is used by PnP device. ISA / EISA The resource is used by ISA / EISA device (PCI or ISA). • •••• IRQ (3,4,5,7, 9,10,11,14,15) PCI/PnP The resource is used by PCI/PnP device. ISA / EISA The resource is used by ISA / EISA device (PCI or ISA). 57 BIOS Setup Load BIOS Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24d ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP CTION LOAD BIOS DEFAULTS SUPERVISOR PASSWORD POWER MANAGE PNP/PCI CONFIGURA Load BIOS Defaults (Y/N)? N SAVE & EXIT SETUP LOAD SETUP DEFAULTS EXIT WITHOUT SAVING ESC : Quit ^v>< : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit Load BIOS Default except Standard CMOS Setup Figure 7: Load BIOS Defaults • •••• Load BIOS Defaults BIOS defaults contain the most appropriate values of the system parameters that allow minimum system performance. 58 6VM7-4I Motherboard Load Setup Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24d ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED P...