Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Motherboards - GA-P45T-ES3G (23.84 mb)
Motherboards - GA-P45T-ES3G (29.41 mb)
Anleitung Zusammenfassung
Dual channel memory architecture Support for DDR3 1600/1333/1066 MHz memory modules Support for non-ECC memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Audio ♦ ♦ ♦ ♦ ♦ Realtek ALC892 codec High Definition Audio 2/4/5.1/7.1-channel * To enable 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. Support for S/PDIF Out Support for CD In An LAN ♦ 1 x Realtek RTL8111D chip (10/100/1000 Mbit) Expansion Slots ♦ ♦ 1 x PCI Express x16 slot, running at x16 1 x PCI Express x1 slot 5 x PCI slots ^ Storage Interface ♦ ♦ ♦ South Bridge: - 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices JMicron JMB368 chip: - 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices iTE IT8718 chip: - 1 x floppy disk drive connector supporting up to 1 floppy disk drive USB ♦ South Bridge: - Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets connected to the internal USB headers) Hardware Installation - 10 - Internal ♦ 1 x 24-pin ATX main power connector mil Connectors ♦ 1 x 4-pin ATX 12V power connector ♦ 1 x floppy disk drive connector ♦ 1 x IDE connector ♦ 6 x SATA 3Gb/s connectors ♦ 1 x CPU fan header ♦ 2 x system fan headers ♦ 1 x front panel header ♦ 1 x front panel audio header ♦ 1 x CD In connector ♦ 1 x S/PDIF Out header ♦ 3 x USB 2.0/1.1 headers ♦ 1 x power LED header ♦ 1 x chassis intrusion header ♦ 1 x clearing CMOS jumper Ük! Back Panel ♦ 1 x PS/2 keyboard port Connectors ♦ 1 x PS/2 mouse port ♦ 1 x parallel port ♦ 1 x serial port ♦ 1 x coaxial S/PDIF Out connector ♦ 6 x USB 2.0/1.1 ports ♦ 1 x RJ-45 port ♦ 3 x audio jacks (Line In/Line Out/Microphone) $ I/O Controller ♦ iTE IT8718 chip W4 Hardware ♦ System voltage detection Monitor ♦ CPU/System temperature detection ♦ CPU/System fan speed detection ♦ CPU overheating warning ♦ CPU/System fan fail warning ♦ CPU/System fan speed control * Whether the CPU fan speed control function is supported will depend on the CPU cooler you install. BIOS ♦ 2 x 8 Mbit flash ♦ Use of licensed AWARD BIOS ♦ Support for DualBIOS™ ♦ PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Hardware Installation Unique Features a Bundled Software Support for @BIOS Support for Q-Flash Support for Xpress BIOS Rescue Support for Download Center Support for Xpress Install Support for Xpress Recovery2 Support for EasyTune * Available functions in EasyTune may differ by motherboard model. Support for Easy Energy Saver * Due to the hardware limitation, you must install the Intel® Core™ 2 Extreme/ Core™ 2 Quad/ Core™ 2 Duo/ Pentium Dual-Core/ Celeron Dual-Core/ Celeron 400 Series CPU to enable support for Easy Energy Saver. Support for Smart Recovery Support for Auto Green Support for ON/OFF Charge Support for Q-Share Norton Internet Security (OEM version) Operating System Support for Microsoft® Windows 7/Vista/XP Form Factor ♦ ATX Form Factor; 30.5cm x 21.0cm * GIGABYTE reserves the right to make any changes to the product specifications and product-related in formation without prior notice. Hardware Installation - 12 - 1-3 Installing the CPU and CPU Cooler A Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. • Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may locate the notches on both sides of the CPU and alignment keys on the CPU socket.) • Apply an even and thin layer of thermal grease on the surface of the CPU. • Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage of the CPU may occur. • Set the CPU host frequency in accordance with the CPU specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the standard requirements for the peripherals. If you wish to set the frequency beyond the standard specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc. 1-3-1 Installing the CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. LGA775 CPU Socket Alignment Key Alignment Key Pin One Corner of the CPU Socket Triangle Pin One Marking on the CPU - 13 - Hardware Installation B. Follow the steps below to correctly install the CPU into the motherboard CPU socket. A Before installing the CPU, make sure to turn off the computer and unplug the power cord from L_^ the power outlet to prevent damage to the CPU. Step 1: Completely raise the CPU socket lever. Step 3: Remove the protective s...