Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Find the Q-Share icon £ in your system tray and right-click on this icon to configure the data sharing settings. Enable Incoming Folder... Open Incoming Fold« : C:\Q-StwicFold« Clung« Incoming Fdd«f : C:\Q-ShweFolde Figure 1. Data Sharing Disabled Figure 2. Data Sharing Enabled Options Descriptions Option Description Connect ... Displays the computers with data sharing enabled Enable Incoming Folder ... Enables data sharing Disable Incoming Folder ... Disables data sharing Open Incoming Folder : C:\Q-ShareFolder Accesses the shared data folder Change Incoming Folder : C:\Q-ShareFolder Changes the data folder to be shared (Note) Update Q-Share ... Updates Q-Share online About Q-Share ... Displays the current Q-Share version Exit... Exits Q-Share (Note) This option is available only when data sharing is NOT enabled. GA-EP45C-DS3R/DS3 Motherboard - 82 - 4-7 Time Repair Based on the Microsoft Volume Shadow Copy Services technology, Time Repair allows you to quickly back up and restore your system data in the Windows Vista operating system. Time Repair supports NTFS file system and can restore system data on PATA and SATA hard drives. System Restore Choose a system restore point using the navigation bar on the right or at the bottom of the screen to view the system data backed up at different time. You can choose file(s)/directory(ies) and click the Copy button to restore the file(s)/directory(ies) or click Restore to restore the entire system. Preference Screen: Button Function ON Automatically creates system restore points OFF DO NOT automatically create system restore points SCHEDULE Sets a regular interval for creating system restore points CAPACITY Sets the percentage of hard drive space used for saving shadow copies TRIGGER Creates a system restore point upon the first boot up of the day ? Displays the Time Repair help file The hard drive used must have more than 1 GB of capacity and over 300 MB of available space. Each storage volume can accommodate 64 shadow copies. When this limit is reached, the oldest shadow copy will be deleted and unable to be restored. Shadow copies are read-only so you cannot edit the contents of a shadow copy. - 83 - Unique Features 4-8 Teaming Dual LAN with Teaming functionality enabled on this motherboard allows two single connections to act as one single connection for twice the transmission bandwidth, making data transmission more effective and improving the quality of transmission of distant image(s). Fault tolerance on the dual LAN network prevents network downtime by transferring the workload from a failed port to a working port. The speed of transmission is subject to the actual network environment or status even with Teaming enabled. A. Enabling Teaming Functionality in Windows XP: Step 1 : Insert the motherboard driver disk and select Application Software, Install Application Software. Click Install under Realtek Ethernet Teaming Utility for installation. Restart your system when completed. IfllRl Oil» Step 3: Choose Teaming and click the Create Team button. Step 2: The Realtek Ethernet Diagnostic Utility icon _lJ appears in the system tray after the system restarts. Double-click the icon to access the utility. Step 4: Give a name for the Team, e.g. Teaming, and set up the Teaming mode based on your hub's specifications. Select the check boxes for the two available adapters and click OK. Removing the Existing Teaming: After you complete the setup, you will see the third virtual network interface. Go to Local Area Connection Status and you will see the connection speed is 2.0 Gbps. louiiUucmisncL- If you want to remove the existing Teaming, click the item you created, and then click the Remove button. GA-EP45C-DS3R/DS3 Motherboard - 84 B. Enabling Teaming Functionality in Windows Vista: •. =r ! К — $ “ j Select Realtek Ethernet Teaming Utility and click Install. Step 1: Insert the motherboard driver disk and select Application Software, Install Application Software. Click Install under Realtek Ethernet Teaming Utility for installation. Restart your system when completed. Step 2: Click the Start icon©. Point to All Programs, Realtek Teaming and VLAN, Realtek Teaming and VLAN Utility to access the utility. Select the two adapters and set up the Teaming mode based on your hub's specifications. Then click the Teaming button. (Two dialog boxes will appear during the setup process, click OK to continue). When the Create Virtual Adapter For Teaming Complete dialog box appears, click OK to complete. Click View status in Network and Sharing Center and you will see the connection speed is 2.0 Gbps. Step 4: After the Teaming is created, you will see only one connection in Network and Sharing Center. Removing the Existing Teaming: 90 .1». & T«-^j um, BS »«liii RMMRTltt«K/l”ICF«ii+FO< 6vt* 1|ЦЦЧр* (■■««•(МОяКЛШа • Lrt AeroMo- ' 1*0» «К J«* I 'ЛЖ 1 ¡ Тмц 1 If you want to remove the existing Teaming, ...