Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
If the gasoline being used contains alcohol, it is advisable to drain as much of the remaining gasoline as possible from the fuel tank, remote fuel line, and engine fuel system. IMPORTANT: This outboard is equipped with a closed fuel system when the engine is not running. With this closed system, fuel within the engine's fuel system, other than the fuel tank, will remain stable during normal storage periods without the addition of fuel treatment stabilizers. Fill the fuel tank and engine fuel system with treated (stabilized) fuel to help prevent formation of varnish and gum. Proceed with the following instructions. • Portable Fuel Tank - Pour the required amount of Fuel System Treatment and Stabilizer (follow instructions on container) into fuel tank. Tip fuel tank back and forth to mix stabilizer with the fuel. • Permanently Installed Fuel Tank - Pour the required amount of Fuel System Treatment and Stabilizer (follow instructions on container) into a separate container and mix with approximately one liter (one quart) of gasoline. Pour this mixture into fuel tank. Tube Ref No. Description Where Used Part No. Fuel System Treatment & Stabilizer Fuel tank 802875A1 Ê 124 O 103 STORAGE Protecting External Outboard Components • Touch up any paint nicks. See your dealer for touch-up paint. • Spray Quicksilver or Mercury Precision Lubricants Corrosion Guard on external metal surfaces (except corrosion control anodes). Tube Ref No. Description Where Used Part No. Corrosion Guard External metal surfaces 92-802878-5 5 Ê 120 O Protecting Internal Engine Components IMPORTANT: Refer to Maintenance - Spark Plug Inspection and Replacement for correct procedure for removing spark plugs. • Remove pencil coils and spark plugs. • Spray approximately 30 ml (1 fl. oz.) of Storage Seal Rust Inhibitor into each spark plug hole. Tube Ref No. Description Where Used Part No. |_119_0 Storage Seal Rust Inhibitor Spark plug holes 92-802878-5 6 • Actuate key/push button start switch to crank the engine through one start cycle, which will distribute the storage seal throughout the cylinders. • Reinstall spark plugs and pencil coils. Gearcase • Drain and refill the gearcase lubricant (refer to Maintenance -Gearcase Lubrication). Positioning Outboard For Storage Store outboard in an upright (vertical) position to allow water to drain out of outboard. _j!L CAUTION_ If outboard is stored tilted up in freezing temperature, trapped cooling water or rain water that may have entered the propeller exhaust outlet in the gearcase could freeze and cause damage to the outboard. 104 STORAGE Battery Storage • Follow the battery manufacturer's instructions for storage and recharging. • Remove the battery from the boat and check water level. Recharge if necessary. • Store the battery in a cool, dry place. • Periodically check the water level and recharge the battery during storage. 105...