Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Craftsman Dateigröße: 220.94 kb Dateiname: 3c941917-62c2-4990-a7f1-b63d3e14d078.pdf Unterrichtssprache:

315.228310, 315.228410, 315.228510, 113.299310, 113.299410, 113.299510 Item No. _929993 TABLE SAWNOTINCLUDED Save this manual for future reference. • SAFETY _, CAUTION: Read and follow all Safety Rules and Operating • LOOSE PARTS Instructions before first use of • PREPARATION this product. • INSTALLATION • ALIGNMENT Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 972000-662 3-99 READ ALL INSTRUCTIONS • ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; • READ THESE INSTRUCTIONS AND THE they are NOT safety glasses. INSTRUCTIONS FOR YOUR TABLE SAW • ALWAYS DISCONNECT SAW FROM POWER THOROUGHLY before using accessories. SUPPLY BEFORE MAKING ADJUSTMENTS KNOW YOUR POWER TOOL. Read the owner's OR ADDING ACCESSORIES. Make sure the manual for the Table Saw carefully. Learn the switch is off when reconnecting to power supply, saw's applications and limitations as well as the • SAVE THESE INSTRUCTIONS. Refer to them specific potential hazards related to this tool. frequently and use to instruct other users. If you KEEP THE WORK AREA CLEAN. Cluttered loan someone this tool, loan them these instruc work areas and work benches invite accidents. tions also. DO NOT leave tools or pieces of wood on the saw while it is in operation. Look for this symbol to point out important safety precautions. It means attention.q! Your safety is involved. These included parts make up the the fence and rails accessory 9P9993. Fasteners are shown actual size. 1. Fence Rails 2. A, Fence ............................................................. 1 A. Front rail end cap ........................................... 2 B. Screw (1/4-20 x 3/8) ...................................... 2 B. Screw for end caps (5/32-32 x 1/2 in.) ........... 4 C. Fine Adjustment Knob ................................... 1 C, Rear rail end cap ........................................... 2 D. Front rail ......................................................... 1 E. Rear rail ......................................................... 1 © O A. B.C. A. B.C. Fig. 1 2 REMOVING THE SWITCH AND RAILS • Remove the front rail end caps. • Under the front rail, loosen the switch screws and slide the switch off of the rail. See Figure 2. Note: Do not remove the switch screws completely. Loosening the screws will allow you to slide the switch off the front rail and the switch will be ready to install on the new front rail, FRONTRAIL _ TABLE EXTENSION SWlTCHSCREW SWITCH SQUARENUT L._ Fig. 2 SLOTFORBOLT TABLEEXTENSION REARRAIL __ SQUAREHEAD BOLT HEXNUT FLATWASHER Fig. 3 • Remove the rear rail end caps. • Under the table, loosen all of the hex nuts on the square head bolts that hold both front and rear rails. See Figure 3. Note: Do not remove the hex nuts completely. Loosening the nuts will allow you to slide the rails off the table and the square head bolts will be ready for the new rails. • Carefully...

Herunterladen

Geben Sie zwei Ziffern: