Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
COMPOUND MITER SAW WITH STAND AND LASER TRAC® Model No. 137.212410 CAUTION: Before using this Miter Saw, read this manual and follow all its Safety Rules and Operating Instructions . Safety Instructions . Installation . Operation . Maintenance . Parts List Sears, Roebuck and Co., Hoffman Estates, IL60179 USA Visit our Craftsman website: Part No. 13721241001 Printed in China Customer Help Line For Technical Support 1-800-843-1682 Sears Parts & Repair Center 1-800-469-4663 TABLE OF CONTENTS SECTION PAGE SECTION PAGE Warranty ............................................... 2 Know Your Compound Miter Saw .......... 10 Product Specifications .......................... 2 Glossary of Terms ................................. 11 Symbols .................................................. 3 Assembly and Adjustments ................... 12 Power Tool Safety ................................. 4 Operation ............................................... 19 Compound Miter Saw Safety ................. 6 Maintenance .......................................... 24 Electrical Requirements and Safety ...... 6 Troubleshooting Guide .......................... 25 Accessories and Attachments ............... 8 Parts List ................................................ 26 Tools Needed for Assembly .................. 8 Repair Protection Agreements................ 30 Carton Contents .................................... 9 WARRANTY CRAFTSMAN ONE YEAR FULL WARRANTY If this Craftsman tool fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME to arrange for free repair (or replacement if repair proves impossible). This warranty applies for only 90 days from the date of purchase if this product is ever used for commercial or rental purposes. This warranty does not include expendable parts, such as lamps, batteries, bits or blades. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Hoffman Estates, IL 60179 R WARNING! Some dust created by using power tools contains chemicals known to the state of California to causecancer and birth defects or other reproductive harm. Some examples of these chemicals are: . Lead from lead-based paints . Crystalline silica from bricks, cement and other masonry products . Arsenic and chromium from chemically treated lumberYour risk from these exposures varies, depending on how often you do this type of work. To reduceyour exposure to these chemicals, work in a well ventilated area and work with approved safetyequipment such as dust masks that are specially designed to filter out microscopic particles. PRODUCT SPECIFICATIONS MOTOR Cutting Capacity: Power Source................ 120V AC, 60Hz, 15 Amp Crosscut ........................... 2-5/8 in. x 5-1/2 in. Arbor Shaft Size............ 5/8 in. Miter 45° R & L ................. 2-5/8 in. x 3-7/8 in. Speed ........................... 4800 RPM (No load) Bevel 45° L ....................... 1-1/2 in. x 5-1/2 in. Brake ............................ Electric 45° Miter and 45° Bevel .... 1-1/2 in. x 3-7/8 in. Double Insulated .......... No Extension Wings ............... 2 MITER SAW BLADE Rotating Table: Diameter ........................... 10 in. Miter Detent Stops ....... 0°, 15°, 22.5°, 31.6°, 45° R & L Arbor ................................. 5/8 in. Bevel Positive Stops .... 0°, 45° L ! WARNING To avoid electrical hazards, fire hazards or damage to the tool, use proper circuit protection. This tool is wired at the factory for 110-120 Volt operation. It must be connected to a 110-120 Volt / 15 Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way. Before using your tool, it is critical that you read and understand these safety rules. Failure to follow these rules could result in serious injury to you or damage to the tool. 2 22 2009/03 SYMBOLS WARNING ICONS Your power tool and its Operator’s Manual may contain “WARNING ICONS” (a picture symbol intended to alert you to, and/or instruct you how to avoid, a potentially hazardous condition). Understanding and heeding these symbols will help you operate your tool better and safer. Shown below are some of the symbols you may see. SAFETY ALERT: Precautions that involve your safety. PROHIBITION WEAR EYE PROTECTION: Always wear safety goggles or safety glasses with side shields. READ AND UNDERSTAND INSTRUCTION MANUAL: To reduce the risk of injury, user and all bystanders must read and understand instruction manual before using this product. KEEP HANDS AWAY FROM BLADE: Failure to keep your hands away from the blade will result in serious personal injury. SUPPORT AND CLAMP WORK .! DANGER .! WARNING .! CAUTION CAUTION DANGER: indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: indicates a potentially hazardous situation wh...