Stimmen - 4, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
+++ +++ +++ CORDLESS CIRCULAR SAW PAHKS 18 V For sawing timber and plastic Please read carefully through the following information concerning safety and proper use. Before reading, fold out the page with the illustrations and make yourself familiar with all the functions of the equipment. Please read the operating instructions below and the accompanying safety advice carefully. Use the equipment only as described and for the indicated purposes. By doing this you will be able to work in complete safety and produce better results. Be careful to keep these advice notes and if necessary pass them on to a third party. PROPER USE Sawing of solid wood, chipboard and plastic. Please note that the blade pre-installed in the saw as supplied is intended for sawing wood only. Any other use or modification to the saw shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. FEATURES OF THE PAHKS 18 V Battery pack Switch lock Guide plate Second hand grip Riving knife Parallel guide Outer flange Attachment screw for parallel guide Screw Angle adjuster Blade cover Sawdust removal Saw blade Rotation direction arrow On/off switch Depth adjuster TECHNICAL INFORMATION Idle speed: n0 3000 rpm Quick charger: Nominal voltage: 18 V Charging current: 1200 mA Blade diameter: 140 mm Charging duration: 50-60 minutes Blade gap: 10 mm Blade thickness: 1 mm Blade tooth thickness max.: 1.5 mm Cutting depth 45°: 28 mm Cutting depth 90°: 40 mm Battery pack: Sound pressure level: 80 dB (A) Nominal voltage: 18 V Sound power level: 93 dB (A) Battery capacity: 1700 mAh Vibration: 0.3 m/s2 (vibration) Capacity: 30.6 Wh Weight: 4.1 kg (no-load speed operation) SPECIFIC SAFETY ADVICE . In addition, you must also read the advice in the accompanying booklet called "Safety advice" before using the equipment for the first time. The cordless circular saw PAHKS 18 V is to be used exclusively for cutting wood and plastic. 4 +++ +++ +++ . Before carrying out any work on the saw, e.g. setting the guide plate etc., always remove the battery pack . . Never remove sawdust or splinters whilst the saw is running – always switch off the saw and remove the battery pack first. . When you are using the circular saw always wear ear protectors and protective glasses. Protective gloves, robust non-slip shoes, and a protective apron are also recommended. . Every time before using the circular saw make sure that you check it for any damage. If any parts are damaged have them fixed or replaced at a specialist repair centre. . Have a suitable tested vacuum device attached to the saw when working for long periods on woods or plastics that create dusts that are hazardous to health. For working with wood in a closed space (interiors) a suitable dust collection device or a suitable dust protection must be used. (safety tested) Be sure to use the integrated protection devices of the manual saw, e.g. the blade protectors . Before every use, check that the saw blade cover moves freely. Do not allow persons under 16 years of age to use the circular saw. . Move the blade cover using the lever only. As the saw is placed on to the material to be cut, the blade cover moves back automatically. The blade cover is not to be fixed in the open position. In addition you should ensure that all moving parts of the saw blade cover function properly and all the assemblies and components involved in covering the saw blade are in perfect working order. Look out for recoil of saw or work piece when carrying out dip cuts. Secure round timber against turning. Do not cut materials containing asbestos. . Ensure that the parameters of the saw blade, e.g. the diameter, thickness and other technical details are suitable for the workpiece. Ensure that the saw blade is suitable for the saw speed. . Cracked or distorted blades are not to be used. HSS (High Speed Steel) saw blades are not to be used. When you are sawing always make sure that you do not cut through any nails, screws or the like. . Set the distance between the riving knife and the tips of the saw blade teeth to a max. 5 mm, and set the distance between the tip of the riving knife and the lowest point of the saw blade to max. 5 mm. The riving knife is only to be removed for plunge cutting. . When you switch off the saw do not use additional braking methods or press against the saw blade side to bring it to a standstill. Note: Do not touch the saw blade teeth – danger of cutting injury. POWERFUL - THE FAST CHARGER Important safety advice for the charger and the battery pack If you come into contact with alkali from the battery pack, wash off the alkali thoroughly with water. If alkali gets into your eyes, flush them out with water and seek immediate medical attention. 1.Read and take not...