Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Taylor Dateigröße: 711.29 kb Dateiname: AC1250BL_ib.pdf Unterrichtssprache:

Chopper blades are extremely sharp; never touch the cutting edge of blades. Use the plastic spindle to position the blades in the bowl. Do not use wet or slippery hands when handling the blade assembly. 5. Clean and wash the food to be used. 6. Add food ingredients to the chopping bowl, distributing them evenly with a spatula (not included). When chopping larger foods, pre-cut them into pieces of an even size, approximately . inch to . inch pieces (see CHOPPING GUIDE). 7. Place the bowl cover onto the chopper bowl. NEVER OPERATE THE CHOPPER UNLESS THE COVER AND BOWL ARE CORRECTLY POSITIONED. Place the motor housing onto the bowl cover. The motor housing will only fit correctly in 2 positions. Turn the motor housing clockwise until it sets firmly into the bowl cover. 8. Plug the appliance into the power outlet. 9. Start the chopper by pushing one of the 2 speed buttons intermittently. The chopper operates with pulse control – press the button and the chopper will operate; release the button and it will stop. Try chopping on the lower speed first. If that is not adequate, try the high speed. 10. If the chopper is laboring, turn off the unit, unplug it, remove some of the mixture and continue to process in smaller batches. 11. A spatula can be used to scrape ingredients toward the center of the bowl, but only if the unit is unplugged first and the blades have stopped. 12. Hard ingredients such as coffee beans and ice will damage the blade. Do not use the food chopper for hard ingredients. 13. The chopper does its work in seconds. Do not operate for longer than 20 continuous seconds at a time. Stop the chopper and allow it to cool for 1 minute after 10 seconds of continuous operation. 14. After completion of chopping, unplug the unit. 15. Reverse the above procedure to remove the motor housing, bowl cover, blade and bowl. CHOPPING GUIDE Food Type Maximum Quantity Preparation Apples 8.5 oz. Peeled and cored then cut into 1 inch pieces Bacon strips 8.5 oz. Cooked crisp and drained Bread 2.5 oz. Cut into . inch cubes Cheese (soft, cheddar, etc.) 3.5 oz. Cut into . inch cubes Eggs 6 Hard boiled and quartered Fruit (soft, berries, etc.) 10.5 oz. Remove stems and stalks Herb/Parsley 1.5 oz. Remove stalks Meat 7 oz. Remove bones, fat and gristle, cut into . inch cubes Nuts (soft, almonds, etc.) 10.5 oz. Use halved or in pieces, scrape down side of bowl to ensure even chopping Onions 8.5 oz. Cut into . inch pieces CLEANING AND MAINTENANCE After each use and before cleaning, unplug the appliance from outlet and allow the unit to stop. DO NOT ATTEMPT TO CLEAN WHILE THE MOTOR IS RUNNING OR THE COMPONENTS ARE STILL MOVING. CAUTION: NEVER IMMERSE THE MOTOR HOUSING, CORD OR PLUG IN WATER. NEVER TOUCH THE BLADE ITSELF. ALWAYS UNPLUG BEFORE CLEANING. ? Clean the motor housing with a damp soft cloth or sponge and dry thoroughly. ? Never use excess water, treated cloths, harsh cleaning agents, or sprays. ? Wash all of the removable parts, bowl cover, blade and bowl using a sponge, warm water and mild dish detergent. Rinse and dry carefully. You may also wash the bowl cover and bowl in the top rack of an automatic dishwasher. Use caution when handling the blades, as they are very sharp. Do not touch the blade itself; instead handle by the plastic spindle with clean and dry hands. Dry all parts thoroughly. ? Reassemble and store in a dry place, unplugged and away from the reach of children. TROUBLESHOOTING The Food Chopper will not operate. ? Has a household fuse blown, or has a circuit breaker tripped? ? Is the power supply cord properly seated in the unit and the outlet? ? Are the inter-locking bowl and bowl cover secured properly? ? Is the motor housing nested properly into the bowl cover? ? Has the cord been damaged in some way? If so, DO NOT USE THE APPLIANCE. Contact Customer Service for replacement information. The Food Chopper is vibrating. ? Are the components securely positioned in the bowl? If not, turn off the unit and reposition the components onto the bowl. ? Has the appliance been overloaded? Attempting to chop large quantities or large pieces of food may cause vibration. See section titled “How to use your Chopper” or the Chopping Guide. The motor housing will not seat properly. ? Is the bowl cover sitting securely on the bowl? ? If the motor housing is not sitting down into the bowl cover and resting on the support, turn it clockwise until it dips down and nests securely in the bowl cover. Food is unevenly chopped. ? Either you are chopping too much food at one time, or the pieces are not small enough. Try cutting food into smaller pieces of even size and processing a smaller amount per batch. Food is chopped too fine or is watery. ? The food is over processed. Use brief pulses, or process for less time. Food is collecting on the sides of the bowl or container. ? You may be processing too much food. Turn machine off. When the blade stops completely, unplug then remove the cover and scrape with a spatula, turning f...

Herunterladen

Geben Sie zwei Ziffern: