Stimmen - 0, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
• To remove the blade from the blade holder, push the blade from the back of the blade holder. (Fig. 8) BACK OF BLADE HOLDER PRESS DOWN ON BACK OF BLADE Fig. 8 Caution: Handle blade carefully to avoid cuts and injuries. Speed Control Dial The speed control dial has the following speed settings: • Off: Turn the speed control dial to “ Off” in order to stop the food processor from operating. • 1 to 9: Speed levels may be increased from 1 to 9. The speed can be adjusted while the food processor is in use. • Max: Highest level of speed that the food processor can operate at. • PULSE: Use of the “ PULSE” button allows greater control over the texture of the food being processed. Use " PULSE" when the unit is in the " Off" position. Caution: The " PULSE" function is only intended to be used for short periods of time. Damage to the unit may occur if not used properly. Operating the Food Processor Once having assembled the food processor according to the “ Assembly Instructions” the unit is now ready for use. 1. Place the lid on top of the food processor bowl. Once in place twist it to the left so that it is locked securely. (Fig. 9) Note: Until the lid is securely in place, ensure that the unit is NOT plugged into an electrical outlet. Operating Instructions TWIST THE LID TO THE LEFT TO LOCK INTO PLACE Fig. 9 2. Plug in the processor and turn the speed control dial to the desired speed level. If the processor does not come on check that the lid are correctly fitted and locked into place. Important Note: The unit will NOT operate without the lid locked into place. 3. Use the food pusher when putting food into the feeder tube. (Fig. 10) For safety reasons it is always better to use the food pusher, and to NEVER feed food by hand. Caution: DO NOT operate the unit for intervals longer than 20 seconds. If longer chopping or mixing is required, run for 20 seconds, allow motor to stop and run again for another 20 seconds. FOOD PUSHER FEEDER TUBE Fig. 10 4. When finished using the food processor, turn the speed control dial to the “ Off” position and unplug it from the electrical outlet. 6 Processing Examples 15 – 30 SECONDS 8 – MAX 24.5 oz / 700 gr. APPLES 10 – 20 SECONDS 1 - 8 24.5 oz / 700 gr. LIQUIDS (SOUPS) 30 SECONDS 6 - 8 24.5 oz / 700 gr. CARROTTS 15 – 30 SECONDS 6 - 8 4 SLICES BREAD 15 - 30 SECONDS 8-MAX 21 oz / 600 gr. NUTS 15 - 30 SECONDS 1 - 8 24.5 oz / 700 gr. FISH* 15 – 30 SECONDS 4 - 8 24.5 oz / 700 gr. CHEESE 15 – 30 SECONDS MAX MAX 4 BUNDLES PARSLEY 15 - 30 SECONDS 5 - 6 24.5 oz / 700 gr. ONIONS 15 - 30 SECONDS MAX 24.5 oz / 700 gr. MEAT* OPERATION TIMES (used in 10 - 20 second intervals) RECOMMENDED SPEED QUANTITY PRODUCT Processing Examples with the Upper and Lower Chopping Blades The processing times indicated below are approximate and also depend on the quantity of the food to be processed and the degree of fineness you require. Hints & Tips for Chopping Blades • Use both chopping blades for meats, fish, vegetables, cheese, etc. and have the speed level set to “ Max”. • For finer chopping, increase the length of time you process. DO NOT exceed processing times of more than 20 seconds per processing interval. • For coarser chopping, use the “ PULSE” button for a few seconds and monitor food texture. • Pre-cut larger pieces to make them fit into the feeder tube. When chopping hard foods (e.g. meat, cheese) cut into 1-inch (2.4 cm) cubes. Processing Examples for Blades Recommended speed for processing with chopping blades is High. Grating (Hard Cheeses) French Fry (Potatoes) Thin Slicing (Carrots, cucumbers, raw potatoes, lettuce) Thick Slicing (Cabbage, carrots, onions) Thick Shredding (Lettuce, carrots, onions, soft cheeses) Thin Shredding (carrots, potatoes, cucumbers, cabbage, soft cheeses) Hints & Tips for Blades • For shredding, place food horizontally into the feeder tube. • For slicing, place the food vertically. • If grating potatoes add 1 tsp of lemon juice to prevent them from black. Potatoes can be sliced using the thin slicing blade for chips or use the french fry blade if making french fries. 7 Maintenance & Cleaning Instructions Cleaning and Maintenance Caution: Make sure that the unit is unplugged from the power source and the speed control dial is in the “ OFF” position before inserting or removing attachments. • Never immerse the unit, cord or plug in water or any other liquid. • Clean the main unit with a damp cloth only. • Use extreme caution when cleaning the chopping blade as the blades are very sharp. • All other parts can be cleaned in warm sudsy water using regular dishwashing liquid. • If food has spilled over on to the main unit, use the pointy end of the spatula to clean the cracks and crevices of the base under the food processor bowl. • The lid and protective blade guards may be washed in lukewarm water and a mild dishwashing liquid. DO NOT place these in the dish- washer. Using the Storage Compartment The food processor comes with a blade storage compartment. 1. Press down ...