Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Notice for customers in the United Kingdom A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. GB 7 GB Identifying parts A Shutter button B Mode dial (Intelligent Auto)/ (Superior Auto)/ (Background Defocus)/ (Program Auto)/ (Scene Selection)/ (Manual Exposure Shooting)/ (iSweep Panorama)/ (Movie Mode)/ (3D Shooting) C For shooting: W/T (Zoom) lever For viewing: (Index) lever/ (Playback zoom) lever D Self-timer lamp/Smile Shutter lamp/AF illuminator E ON/OFF (Power) button F Power/Charge lamp G Speaker H Flash • Do not hold your fingers near the flash. • When using the flash, the flash pops up automatically. • The flash goes down automatically when the power is turned off, the camera is switched to playback mode or the shooting mode is changed. I Microphone J Lens K LCD screen L GPS sensor (built-in, DSC HX10V only) M (Playback) button N MOVIE (Movie) button O HDMI mini jack P Hook for wrist strap Q Control wheel R / (In-Camera Guide/Delete) button S MENU button T Tripod receptacle • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. U Micro USB connector V (TransferJet™) mark W Memory card slot X Battery/memory card cover Y Battery eject lever Z Battery insertion slot wj Access lamp GB Inserting the battery pack Battery eject lever 1 Open the cover. 2 Insert the battery pack. • While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion. • Closing the cover with the battery inserted incorrectly may damage the camera. GB 9 Charging the battery pack Power cord (Mains lead) For customers in the USA and Canada For customers in countries/regions other than the USA and Canada Power/Charge lamp Lit: Charging Off: Charging finished Flashing: Charging error Charging paused due to overheating Charging the battery pack Power cord (Mains lead) For customers in the USA and Canada For customers in countries/regions other than the USA and Canada Power/Charge lamp Lit: Charging Off: Charging finished Flashing: Charging error Charging paused due to overheating 1 Connect the camera to the AC Adaptor (supplied), using the micro USB cable (supplied). 2 Connect the AC Adaptor to the wall outlet (wall socket). The Power/Charge lamp lights orange, and charging starts. • Turn off the camera while charging the battery. • You can charge the battery pack even when it is partially charged. • When the Power/Charge lamp flashes and charging is not finished, remove and re-insert the battery pack. GB Notes Notes If the Power/Charge lamp on the camera flashes when the AC Adaptor is connected to the wall outlet (wall socket), this indicates that charging is temporarily stopped because the temperature is outside the recommended range. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50.F to 86.F). • The battery pack may not be effectively charged if the terminal section of the battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton GB swab to clean the terminal section of the battery. • Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect from the power source. • When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket). • Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied) and AC Adaptor (supplied). x Charging time (Full charge) The charging time is approximately 175 min. using the AC Adaptor (supplied). Note • The above charging time applies when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances. GB 11 x Charging by connecting to a computer x Charging by connecting to a computer Note • Note the following points when charging via a compu...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-HX10V (4.73 mb)