Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
• Never immerse the unit, cord or plugin water or any other liquid. • Clean the main unit with a damp cloth only. • Only the stainless steel blades canbe washed in the dishwasher. • All other parts can be cleaned inwarm sudsy water using regular dishwashing liquid. • If food has spilled over on to the mainunit, use the pointy end of the spatulato clean the cracks and crevices of the base under the food processor bowl. (Fig. 19) Fig. 19 Hints & Tips: • The double chopping blade can beused for chopping meat, fish, vegetables, cheese, etc. setting the speed to maximum. • For finer chopping, increase the length of time you process. • For coarser chopping, use the pulse button for a few seconds and monitor food texture. • Pre-cut larger pieces to make them fitinto the feed tube. When choppinghard foods (e.g. meat, cheese) cut into 1 “/2.4 cm cubes. • For shredding, place food horizontallyinto the feed tube, for slicing place thefood vertically. 8 1. Main Unit 2. On/Off Speed Control Dial 3. Pulse/Turbo Button 4. Storage Compartment 5. Processor Bowl 6. Double Chopping Blade 7. Processor Cover 8. Food Pusher 9. Spindle 10. Dough Blade Technical Specifications Voltage: 120V., 60Hz. Power: 800 Watts Capacity: 6 Cups (1.5 Liters) 11. Spatula 12. French Fry Disc Assembly 13. Blade Holder 14. Fine Slicing Blade 15. Coarse Shredding Blade 16. Thick Slicing Blade 17. Fine Shredding Blade 18. Whipper 19. Citrus Juicer Filter 20. Juice Reamer IMPORTANT: Remove protective chopping blade cover(s) before use. Protective blade covers to only be used for storage. Illustrations may differ from product 3 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Citrus Juice Filter (cont.) 4. Insert the juice reamer into the center of the citrus juice filter with itsshaft inside the central column of the bowl. (Fig. 13) 5. Plug in the appliance. Fig. 13 6. Place fruit on juicereamer and hold with a cupped hand. 7. Operate at minimum speed. WARNING: Always operate thejuicer at minimum speed only. Do not operate the citrus juicer athigher speeds. Slicing & Shredding Blades CAUTION: Make sure that the unit is unplugged from the powersource and the speed control dial is inthe “OFF” position before inserting orremoving attachments. 1. Place the blade of your choice on the blade holder. Inserting the longer tab on the side of the blade first. (Fig. 14) 2. Press the other end of the blade until it clicks into place. (Fig. 15) 3. Fit the processor bowl and spindle as detailed on the page 4. 4. Using the finger holes in the blade holder, fit it over the spindle and press firmly into place as indicated. (Fig. 16) WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP. 5. Fit the lid and click into place as described in the Setting Up section (page 4). 6. Plug in the processor. WARNING: USE THE FOOD PUSHER TO ADD FOOD INTO THE PROCESSOR BOWL THROUGH THE FEEDER TUBE. Do not overload the food processor bowl. In one operation, you can process a maximum of 6 cups (1500 ml) of food. Fig. 16 Fig. 14 Fig. 15 French Fry Blade Assembly CAUTION: Make sure that the unit is unplugged from the powersource and the speed control dial is inthe “OFF” position before inserting orremoving attachments. Note: The French Fry Blade is alreadyassembled to the blade holder. Do not try to remove it. (Fig. 17) 1. Fit the processor bowl and spindleas detailed previously. 2. Using the finger holes in the French Fry blade holder, fit it over the spindle and press firmly into place asindicated. (Fig. 18) WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP. 4. Fit the lid and click into place asindicated in Setting Up section (page 4). 5. Plug in the processor. WARNING: USE THE FOOD PUSHER TO ADD FOOD INTO THE PROCESSOR BOWL THROUGH THE FEEDER TUBE. Do not overload the bowl. In one operation, you can process a maximum 6 cups (1500 ml) of food. Fig. 18 Fig. 17 7 Speed Control Dial The food processor speed control dial has two speeds settings plus " Pulse" and "Turbo" . 1 - Low 2 - High The speed can be adjusted while the food processor is in use. Use of the Pulse/Turbo button allows greater control over the texture of the food being processed. Use " Pulse" when the unit is in the " Off" position. Use " Turbo" when the unit is in the " On" position and you need a burst of power. Please note that the " Pulse" and " Turbo" is only intended to be used for short "bursts" of processing. Operating the Food Processor Setting up: 1. CAUTION: Make sure that the unit is unplugged from the power source and the the Speed control dial is in the"Off" position before inserting or removing any attachments and beforecleaning. 2. Place the food processor bowl onto the processor body. There is no needto turn the bowl. (Fig. 1) 3. When fitted correctly, the handle willbe to the right of the assembly, and the ridge on the base of the bowl willfit into the slot at the back of the processor body. (Fig. 2) Fig. 1 Fig. 2 4. Now you are ...