Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Please take time to read through this entire manual before installation and use. Please read and follow instructions carefully! PRECAUTIONS Excessive water temperature is dangerous and should be checked BEFORE use. Maximum temperature of the water inside the Pedicure Spa tub should never exceed 100 degrees Fahrenheit . VERY IMPORTANT! DO NOT STAND IN TUB! The Pedicure Spa has been designed to massage the feet and toes with gentle water movement. THE TUB IS NOT INTENDED TO BE STOOD IN. Standing in tub may cause severe damage to the unit as well as possible serious injury to the person. NEVER bring and/or operate any electrical devices into or near the Pedicure Spa. RECEIPT & INSPECTION Thoroughly inspect each shipment immediately upon arrival. It is important that you notify the driver of any damage and insist on a notation directly on the face of the freight bill. Failure to note damage on the face of the freight bill may impede and/or prevent any claims that you may have against the carrier. If concealed loss or damage is found, you must notify the carrier at once and request an inspection. DO NOT DISCARD THE SHIPPING CARTON. If you give the carrier a clear receipt for goods that have been damaged in transit, you do so at your own risk and expense. WARNING Do Not use if you are diabetic, have poor circulation, or if any area of your feet or legs are inflamed or have open wounds. Consult a physician before using if you have any kind of fungal infection, swelling, fracture, or persistent pain. IF YOU EXPERIENCE PAIN OR DISCOMFORT, DISCONTINUE USE IMMEDIATELY AND CONSULT A PHYSICIAN. * European TouchTM, reserves the right to make changes in product characteristics, packaging, colors, and design at anytime without notice. Meets ANSI Specifications ASME/ANSI A112.19.7M (1995). Patents Granted. Made in USA. Parts & Contents Item, Part Number, Description 1 PetiteTM Shell 2 01010023 Footrest – Center 3 01010021 Petite Tub Cover 4 01010031 Footrest – Left Side 5 01010032 Footrest – Right Side 6 01130006 Rivet – Aluminum 12 7 03130002 Air Button 8 03010008 Suction Cover 9 03010010 Suction Head Guard 10 01150006 Suction Pipe Assembly 11 01150002 Discharge Valve Assembly 12 01150004 Jet Sub-Assembly 13 01010020 Spill Tray 14 01130003 5/16 X Bolt 15 01130005 5/16 Locknut 16 01040002 Whirlpool pump 17 01130002 Front Caster – Locking 17A 01130010 Rear Caster – Non-Locking PetiteTM Portable Pedicure Spa Operating Instructions A) Electrical Outlet: Your PetiteTM Portable Pedicure Spa should be conveniently located near adequate utilities during use. A 115V, 60HZ GFCI protected outlet must be used. DO NOT operate the Pedicure Spa without GFCI protection. The PetiteTM Portable Pedicure Spa is also available in a 100v and 220v version. WARNING: DO NOT USE EXTENSION CORDS WITH THE Pedicure Spa B) Filling and running the PetiteTM Pedicure Spa: Replace the faucet aerator with the faucet adaptor included in the hose kit. Screw the white quick connect adaptor into the blue female hose. Connect the adaptor to the faucet by sliding the white sleeve down while sliding the connector onto the faucet adaptor. The discharge valve is located at the bottom of the Spa. Make sure that the valve is closed before filling with water. The discharge valve is closed when the valve handle is horizontal. 4 Fill the Spa with warm water. It is not recommended that the water temperature excedes 100 degrees F. 5 Fill the tub with water to the wavy line on the tub wall. 6 The on/off button is located underneath the footrest. Push it once to start the Spa, push it again to stop the Spa. 7 Adjust the pressure of the jets by turning the round adjusting cover on each jet. To adjust the direction of the water flow, move the jet eyeball located in the center of the jet assembly. 8 PetiteTM Portable Pedicure Spa Operating Instructions C.) Draining the PetiteTM Pedicure Spa: Close the jets by turning the adjusting cover clockwise, so that no water flows through the jets. Turn the Spa off by pushing the on/off button located under the footrest. Screw the orange disconnect adapter to the male hose. Slide the orange quick connect onto the discharge valve. Make sure that the connection is secure. Route the discharge hose into a drain or sink. 4 Open the discharge valve by turning the handle so that it is straight with the discharge valve. 5 Make sure the hose is secure, then turn the Spa on by pushing the on/off button located under the footrest. 6 Run the pump until the water stops draining out of the hose. It is normal for a low volume of water to run out of the jets while the Spa is draining. 7 Turn the Spa off by pushing the on/off button located under the footrest. 8 Close the discharge valve handle and disconnect the drain hose from the discharge valve. 9 Pull the drip pan out about halfway and slowly open the discharge valve. Drain the remaining water into the drip pan and pour the water into a drain or sink. Repeat this until there is no more water draining...