Hersteller: Samsung Dateigröße: 8.45 mb Dateiname: Unterrichtssprache:

Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite

You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps . If the room temperature reaches 5°C higher than the set temperature, the air conditioner stops heating, but the fan operates consistently. . If the room temperature reaches 3°C lower than the set temperature, the air conditioner starts heating again. 4 Press the button to select the fan speed until the required setting is displayed. Automatic (rotated : ) Low Medium High Result: . Each time you press the button, the indoor unit beeps. . The fan speed indicator increases and decreases continuously and turns round each time you press the button. . For the first 3~5 minutes, the fan may not operate to prevent cool air from flowing out of the indoor unit. It helps to warm the air in your room sufficiently. Note The fan speed indicator of the indoor unit varies according to the temperature in the Automatic fan speed. 5 To control the airflow direction, refer to page 21. Control Panel E-15 ENGLISH Selecting the Dry Mode You can select the Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 If necessary, press the (On/Off) button. Result: .. The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 18°C and 30°C. Result: . Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps . The air conditioner starts dehumidifying and the fanspeed is adjusted automatically. 4 To control the airflow direction, refer to page 21. E-16 Selecting the Fan Mode You can select the Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 If necessary, press the (On/Off) button. Result: .. The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in the Fan mode. . The temperature is set automatically. Note You can change modes at any time. 3 Press the button to select the fan speed until the required setting is displayed. Low Medium High Result: . Each time you press the button, the indoor unit beeps. . The fan speed indicator increases and decreases continuously and turns round each time you press the button. 4 To control the airflow direction, refer to page 21. Control Panel E-17 ENGLISH Selecting the Turbo Function You can select the Turbo Function if you want to cool or heat your room in the fastest way. After the 30 - minute operation with the maximum setting, it returns to the previous setting. 1 If necessary, press the (On/Off) button. Result: .. The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button. Result: . The temperature and fan settings are adjusted automatically. . The fan speed indicator turns round with the maximum setting and speed. . The air conditioner cools or heats the room as quickly as possible. . After 30 minutes, the air conditioner is reset automatically to the previous setting. . You can select the Turbo function in the Auto, Cool and Heat mode. If you select this function in the Dry or Fan mode, the mode changes to the Auto mode. 3 Press the button again to stop the Turbo Function before the end of the 30-minute period. Result: The air conditioner is reset automatically to the previous setting. 4 To control the airflow direction, refer to page 21. Control Panel E-18 Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling. The temperature range decreases in order to perform this function. 1 If necessary, press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button. Result: . The indoor unit beeps. . The air conditioner runs in the Energy Saving Function. . The outer airflow blade moves up and down. . To stop the Energy Saving Function, press the again. Note You can select the Energy Saving Function only in the Cool mode. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 26°C and 30°C. Note If you want to adjust temperature under 26°C, cancel the Energy Saving Function before adjusting the temperatur...

Dieses Handbuch ist für folgende Modelle:
Splitgeräte - AVXWHH071EA-01 (8.45 mb)
Splitgeräte - AVXWHH071EA (8.45 mb)

Herunterladen

Geben Sie zwei Ziffern: