Stimmen - 6, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Do not use old batteries or different kinds of batteries together. . Batteries may be completely discharged after 12 months, even if they have not actually been used. 1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. 2 Insert the two batteries, taking care to respect the polarities : + on the battery with + on the remote control. - on the battery with - on the remote control. 3 Close the cover by sliding it back until it clicks into place. Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the optimum temperature and the fan speed is selected automatically. If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. 2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the The air conditioner runs in AUTO mode. button. N NNNN o oooo t tttt e eeee You can change modes at any time. E-9 ENGLISH Cooling Your Room 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in COOL mode. 2 Notte You can change modes at any time. To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating. 3 Select the fan speed by pressing the button one or more times until the required setting is displayed: Automatic (rotated : ) Low Medium High Result: Each time you press the button, the indoor unit beeps. 4 5 To control the direction of the air flow, refer to page 17. You must select the Cool mode if y...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ07P8GE/FES (1.51 mb)
Splitgeräte - AQ07P8GE/ROD (1.51 mb)
Splitgeräte - AQ07PBGE (1.51 mb)
Splitgeräte - AQ09P8GE (1.51 mb)