Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
4 To control the direction of the air flow, refer to page 17. IMPORTANT Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in FAN mode. The temperature is set automatically. Notte You can change modes at any time. 3 Select the fan speed by pressing the button one or more times until the required setting is displayed: Low Medium High Result: Each time you press the button, the indoor unit beeps. 4 To control the direction of the air flow, refer to page 17. E-14 Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, select the Energy saving mode with the Energy saving button. 3 Press the button. Result: The indoor unit beeps. The air conditioner runs in the Energy saving mode. The outer air flow blade moves up and down. To stop the Energy saving mode, press the button again. 4 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 26°C and 30°C inclusive. Notte If you want to adjust temperature under 26°C, cancel the Energy saving mode before adjusting the temperature. 6 To control the direction of the air flow, refer to page 17. 5 To select the fan speed, press the button one or more times until the required setting is displayed. E-15 ENGLISH 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 Select COOL mode by pressing the button. Notte You can select the Energy saving mode only in COOL mode. Generating anion E-16 The air conditioner can generate anion with an ionizer in the indoor unit. Since it is an additional function, you can select it any mode, even when the air conditioner is turned off. 1 Press the button. Result: The air conditioner generates anion. The indoor unit beeps. N NNNNo oooot tttte eeee If you press the button during off, the air conditioner will turn on automatically and generate anion in the Fan mode with Low fan speed. 2 If you wish to stop the Anion function, press the button again. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the direction of the air flow, refer to page 17. Adj...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ07P8GE/FES (1.51 mb)
Splitgeräte - AQ07P8GE/ROD (1.51 mb)
Splitgeräte - AQ07PBGE (1.51 mb)
Splitgeräte - AQ09P8GE (1.51 mb)