Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
• Set the Off timer in mode for more than 5 hours. Sleep may be disturbed if the mode is set for too short or too long a time because the temperature changes are set to an 8-hour cycle. • If the mode is set for less than 4 hours, the operation will stop at the set time. If the mode is set for over 5 hours, the last hour will run in Waking Up stage before shutting off. • Recommended set temperature is between 25.C~27.C for cooling and 21.C~23.C for heating. Cool mode Heat mode Time(hr.) Set temperature Temp. When the 8-hour cycle completes, this section repeats. Time(hr.) Temp. Set temperature When the 8-hour cycle completes, this section repeats. 08'FORTE_28591A_IB_E(.A).indd 19 2007-12-7 14:47:17 E-20 Selecting the Turbo Function You can select the Turbo Function if you want to cool or heat your room as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button. Result: . The temperature and fan settings are adjusted automatically. . The air conditioner cools or heats the room as quickly as possible. . After 30 minutes, the air conditioner is reset automatically to the previous setting. . You can select the Turbo function in Auto, Cool and Heat mode. If you select this function in Dry or Fan mode, the mode changes to Auto mode. 3 Press the button again to stop the Turbo Function before the end of the 30-minute period. Result: The air conditioner is reset automatically to the previous setting. 4 To control the airflow direction, refer to page 21. 08'FORTE_28591A_IB_E(.A).indd 20 2007-12-7 14:47:17 E-21 ENGLISH Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the button until the required direction is set. Result: The outer blade is adjusted vertically. 2 Press the button again to move the blade up and down automatically during operation. 3 Press the button again to stop the blade moving up and down. Note If you turn the air conditioner... Then the blade... Off is closed completely. On set to the default position. Adjusting the Airflow Direction Horizontally You can adjust airflow direction horizontally manually. The inner blades with small fins move the air in the desired direction. 1 Adjust the inner blades by moving them left or right. . Make sure do not touch the inner blades during operation. It may cause injury on your fingers. 08'FORTE_28591A_IB_E(.A).indd 21 2007-12-7 14:47:19 E-22 Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the button until the desired time is di...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ09FA (8.38 mb)
Splitgeräte - AQ09FAN (8.38 mb)
Splitgeräte - AQ09FAX (8.38 mb)
Splitgeräte - AQ09FC (8.38 mb)