Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Panasonic Dateigröße: 2.82 mb Dateiname: Unterrichtssprache:

ENGLISH TOSET THE TIMERTO SET THE TIMER • To turn ON or OFF the unit at a preset time. TIMERSelect ON or OFF timer. Set the time. Confirm. • To cancel ON or OFF timer, press or then press . • When ON Timer is set, the unit may start earlier (up to 30 minutes) before the actual set time in order to achieve the desired temperature on time. • Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation at back cover. • If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is resumed) by pressing . OPTIONAL SETTINGSOPTIONAL SETTINGS Press and hold for 5 seconds to dim or restore the unit’s indicator brightness. Press and hold for approximately 10 seconds to show temperature setting in °C or °F. Press and hold for approximately 5 seconds to show 12-hour (am/pm) or 24-hour time indication. Press to restore the remote control’s default setting. Not used in normal operations. Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. TO SELECT OPERATION MODE AUTO mode - For your convenience • Unit selects the operation mode according to the room temperature. • Once auto mode is selected, the unit will operate atthe standard setting temperature. Room temperature Operationmode Standard setting temperature 23°C & above Cool 25°C Below 23°C Dry 22°C Below 20°C Heat 21°C • To change the standard setting temperature, pressfor “HI” or for “LO”. Operation mode HI (+2°C) LO (-2°C) Cool 27°C 23°C Dry 24°C 20°C Heat 23°C 19°C HEAT mode - To enjoy warm air• In heat mode, it takes a while for the unit to warm up. The power indicator blinks during this operation. COOL mode - To enjoy cool air DRY mode - To dehumidify the environment • Unit operates at low fan speed to give a gentlecooling operation. TO SELECT FAN SPEED (3 OPTIONS) • For AUTO, the indoor fan speed is automaticallyadjusted according to the operation mode. TO ADJUST VERTICAL AIRFLOW DIRECTION (5 OPTIONS) • Keeps the room ventilated. • If AUTO is set, the louvers swing up/downautomatically. • In heat mode, the air blows horizontally for a while, then starts to blow downwards and the airflow louver start to swing left/right after the temperature rises. 6 CAREE & CLLEEANIING WASHING INSTRUCTIONS • Do not use benzene, thinner or scouring powder. • Use only soap ( pH7) or neutral household detergent. • Do not use water hotter than 40°C. HINT • To ensure optimal performance of the unit, cleaning maintenance have to be carried out at regular intervals. Please consult authorized dealer. CAUTION FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE • Checking of remote control batteries. • No obstruction at air inlet and air outlet vents. • After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: Cooling: . 8°C Heating: . 14°C NON SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY AND UNPLUG then please consult authorized dealer under the following conditions: • Abnormal noise during operation. • Water/foreign particles have entered the remote control. • Water leaks from Indoor unit. • Circuit breaker switches off frequently. • Power cord becomes unnaturally warm. • Switches or buttons are not functioning properly. • Timer indicator blinks. FOR EXTENDED NON-USE • Activate heat mode for 2~3 hours to remove moisture left in the internal parts thoroughly. • Turn off the power supply and unplug. • Remove the remote control batteries. • Switch off the power supply and unplug before cleaning. • Do not touch the aluminium fi n, sharp parts may cause injury. ALUMINIUM FIN Remove AIR FILTERS • Air filters cleaning is needed every two weeks. • Wash/rinse the fi lter gently with water to avoid damage to the fi lter surface. • Dry the fi lters thoroughly under the shade, away from fi re or direct sunlight. • Replace any damaged fi lter. FRONT PANEL Remove Front Panel • Raise and pull to remove the front panel. • Wash gently and dry. Close Front Panel • Press down both ends of the front panel to close it securely. INDOOR UNIT Wipe the unit gently with a soft, dry cloth. ENGLISH TTRROOUUBBLLEESSHHOOOOTTIINNGG SymptomSymptom CheckCheck Heating/Cooling operation is not ...

Herunterladen

Geben Sie zwei Ziffern: