Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Admiral Dateigröße: 5.53 mb Dateiname: Unterrichtssprache:

If you press Timer button within the 12 seconds, OFF Timer will be canceled. If the ON Timer is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel ON TIMER, press Timer button. Used to set room temperature in COOLING mode or used to set time in Timer mode. If the two keys are pressed at the same time ,the temperature LED display will alternate between and . button The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button. You can easily operate this air conditioner by pressing the relevant Control Panel button on the control panel as well as the remote control. Above LED lights on when the relevant mode is in used. Button Control Panel Mode Timer Airconditioner High fan speed Medium fan speed Low fan speed Auto fan speed Cooling Fan only Display set temp Display set timer Timer Energy-saving Indication symbols of LED on control panel : Fan Speed Heating Saver Mid Mode Auto High Low Timer 11 2 1 2 3 8 9 8 7 3 5 6 4 1 BUTTON Mode BUTTON Timer BUTTON The appliance will be started when it is energized or will be stopped when it is in operation, if you press this button. Used to select the operation mode. Used to set or cancel timer operation. Remote control Indication symbols of LCD on remote control: 4 High BUTTON Used to select the high fan speed mode. 5 Mid BUTTON Used to select the Mid (same as low) mode. fan speed 6 Low BUTTON Used to select the Low fan speed mode. 7 Auto BUTTON Used to select the Auto fan speed mode. 9 Saver BUTTON Used to select the Energy-saving mode. The Above symbols are shown when the relevant mode is in use. Auto fan speed Low fan speed Medium fan speed High fan speed Signal transmit Cooling Fan only Energy-saving Operating Instructions When Changing modes during operation, sometimes the unit does not always respond at once. Wait 3 minutes. Wait 3 minutes before restarting the appliance. BUTTONS Used to set room temperature in Cooling mode or used to set time in Timer mode. Temperature setting range is from 19 (66 ) to 31 (88 ). Display set temp Display set timer Each time the Mode button is pressed, the operation modeis changed in sequence: COOLING FAN ONLY COOLING Mode Timer Fan Airconditioner How to Insert the Batteries Remove the battery cover according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are matched correctly. Reattach the cover by sliding it back into position. Note: Use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type when the display becomes dim. 12 Signal receptor Remote control If the replacement is done within 1 minute, the remote control will keep original presetting. Operating Instructions How to Use To operate the room air conditioner , aim the remote control to the signal receptor. The remote control will operate the air conditioner at a distance of up to 23 feet when pointing at signal receptor of indoor unit. The remote control is NOT preset as Cooling only or Heat Pump by manufacturer. Each time after the remote control replaces batteries or is energized, the Cooling indicator and Heating indicator will flashes alternately on LCD of the remote control. User can preset the remote control type depending on the air conditioner type you have purchased as follows: Press any button when flashes, Heat Pump will be set. Press any button when flashes, Cooling Only will be set. If you don not press any button within 12 seconds, the remote control will be set as Heat Pump automatically. Back-light function(optional) Remote Control presetting Hold down any button of remote control for about 2 seconds, back-light turns on. Release the button, it lig...

Herunterladen

Geben Sie zwei Ziffern: